Hi Tom,
please pull the Marvell mvpp2 patches with the ethernet
support for the ARMv8 Armada 7k/8k platforms. The
ethernet patches are all acked by Joe and he is okay with
me pushing them via the Marvell tree.
Thanks,
Stefan
The following changes since commit 1c694102a56895b7aea636f026955cc5d7ee340d:
arc: use timer driver for ARC boards (2017-03-29 07:38:11 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 941f7a4b2606ef468f4f3b763261b758eadee861:
arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig
(2017-03-29 07:44:50 +0200)
----------------------------------------------------------------
Stefan Roese (21):
bitops.h: Include bitsperlong.h as needed for GENMASK_ULL
net: mvpp2: Round up top tx buffer boundaries for dcache ops
net: mvpp2: enable building on 64-bit platforms (more U-Boot specific)
net: mvpp2: Add MDIO support for PPv2.2
net: mvpp2: Move probe function from MISC to ETH DM driver
net: mvpp2.c: Clear all buffer / descriptor areas before usage
net: mvpp2: Enable compilation for Armada 7K/8K platforms
arm64: mvebu: armada-7k/8k: Enable MVPP2 ethernet driver
net: mvpp2: Handle eth device naming in multi-CP case correctly
net: mvpp2: Add RX and TX FIFO configuration for PPv2.2
net: include/phy.h: Add new PHY interface modes
net: mvpp2: Restructure probe / init functions
net: mvpp2: Read phy-speed from DT to select between 1GB and 2.5GB SGMII
net: mvpp2: Add GoP and NetC support for ports 2 & 3 (RGMII & SGMII)
net: mvpp2: Add GoP and NetC support for port 0 (SFI)
net: mvpp2: Add missing PHY_INTERFACE_MODE_RGMII_ID
net: mvpp2: Enable PHY polling mode on PPv2.2
net: mvpp2: Configure SMI PHY address needed for PHY polling
net: mvpp2: Remove unreferenced in_use_thresh from struct mvpp2_bm_pool
arm64: mvebu: armada-7040-db.dts: Change eth1 speed from 2.5G to 1G
arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig
Thomas Petazzoni (23):
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: remove unused register definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: use "dma" instead of "phys" where appropriate
net: mvpp2: remove support for buffer header
net: mvpp2: store physical address of buffer in rx_desc->buf_cookie
net: mvpp2: add and use accessors for TX/RX descriptors
net: mvpp2: add hw_version field in "struct mvpp2"
net: mvpp2: introduce an intermediate union for the TX/RX descriptors
net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors
net: mvpp2: adjust the allocation/free of BM pools for PPv2.2
net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2
net: mvpp2: adapt mvpp2_defaults_set() to PPv2.2
net: mvpp2: adjust mvpp2_{rxq,txq}_init for PPv2.2
net: mvpp2: handle register mapping and access for PPv2.2
net: mvpp2: handle misc PPv2.1/PPv2.2 differences
net: mvpp2: add AXI bridge initialization for PPv2.2
net: mvpp2: rework RXQ interrupt group initialization for PPv2.2
net: mvpp2: adapt rxq distribution to PPv2.2
net: mvpp2: finally add the PPv2.2 compatible string
arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K
arch/arm/dts/armada-7040-db.dts | 27 +-
arch/arm/dts/armada-8040-db.dts | 16 +
arch/arm/dts/armada-cp110-master.dtsi | 37 +
arch/arm/dts/armada-cp110-slave.dtsi | 37 +
configs/mvebu_db-88f7040_defconfig | 3 +-
configs/mvebu_db-88f8040_defconfig | 3 +-
drivers/net/Kconfig | 6 +-
drivers/net/mvpp2.c | 2059 +++++++++++++++++++++++++++------
include/configs/mvebu_armada-8k.h | 8 +
include/linux/bitops.h | 1 +
include/phy.h | 6 +
11 files changed, 1867 insertions(+), 336 deletions(-)
[stefan@stefan-work u-boot-marvell (master)]$
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
