Hi Philipp,

    So you got hang in SPL if the DWMMC is no in fifo mode, do you have

any clue for what's the root cause?

+ Ziyuan,

Hi Ziyuan,

    Could you double check this issue? Does it also happen at rk3288 dwmmc?

Thanks,
- Kever
On 03/29/2017 01:14 AM, Philipp Tomsich wrote:
The RK3399 hangs during DMA of the Designware MMC controller, when
performing DMA-based transactions in SPL.  To work around this issue,
we disable DMA-based access modes in the SPL stage.

With this fix in place, we can now drop 'fifo-mode' in the DTS for the
RK3399-Q7 (Puma).

Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>

---

Changes in v2:
- Fixes switching to fifo_mode (should have been 1) in SPL. I broke
   this at the 11th hour due to sloppy preparation of the patch.

  arch/arm/dts/rk3399-puma.dts  |  1 -
  drivers/mmc/rockchip_dw_mmc.c | 11 +++++++++++
  2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/rk3399-puma.dts b/arch/arm/dts/rk3399-puma.dts
index 917df1e..71eb72d 100644
--- a/arch/arm/dts/rk3399-puma.dts
+++ b/arch/arm/dts/rk3399-puma.dts
@@ -91,7 +91,6 @@
  &sdmmc {
          u-boot,dm-pre-reloc;
        bus-width = <4>;
-       fifo-mode; /* until we fix DMA in SPL */
        status = "okay";
  };
diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
index c36eda0..5b4ed7a 100644
--- a/drivers/mmc/rockchip_dw_mmc.c
+++ b/drivers/mmc/rockchip_dw_mmc.c
@@ -76,6 +76,17 @@ static int rockchip_dwmmc_ofdata_to_platdata(struct udevice 
*dev)
                return -EINVAL;
        priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
                                          "fifo-mode");
+
+#if defined(CONFIG_ROCKCHIP_RK3399) && defined(CONFIG_SPL_BUILD)
+       /*
+        * For a RK3399 SPL build, force fifo_mode to on (i.e. disable
+        * DMA) as the MMC transaction will otherwise hang. This issue
+        * reproduces only for SPL (i.e. BL2 in the ATF terminology),
+        * but doesn't occur with the full U-Boot stage.
+        */
+       priv->fifo_mode = 1;
+#endif
+
        if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
                                 "clock-freq-min-max", priv->minmax, 2))
                return -EINVAL;


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to