Am Montag, 27. März 2017, 12:36:00 CEST schrieb Simon Glass: > Hi Heiko, > > On 24 March 2017 at 10:04, Heiko Stuebner <he...@sntech.de> wrote: > > Am Donnerstag, 23. März 2017, 21:28:01 CET schrieb Simon Glass: > >> Hi Heiko, > >> > >> On 20 March 2017 at 05:40, Heiko Stuebner <he...@sntech.de> wrote: > >> > The ARMCLK starts at 24MHz on the rk3188 which makes u-boot startup > >> > unnecessary slow. We can easily switch to 600MHz without involving > >> > the pmic and thus do this in the SPL to also make the rc4-decoding > >> > of the U-Boot image faster. > >> > > >> > Some smaller fixes also turned up while adding the ARMCLK-support. > >> > > >> > It's currently based on Simon's spl-working branch and Kever's > >> > spl_early_init patch, as that includes the last missing rk3188 > >> > patches and also keeps uboot starting on rk3188. > >> > >> This should be in mainline now so can you also please test against that? > > > > yep, all good. > > > > As stated in my fixup series yesterday, this should of course go on > > top of the final radxarock addition. > > I sent a few patches which get it building for me. Please take a look > and see what you think.
Patches 1+2 look very nice, see replies. I'm not sure about the third patch though, as I don't see it affecting the rock-tpl to much. When looking at the diassembly of the tpl-binary, the only driver-related functions still present there, are serial_post_probe and serial_pre_remove. Yesterday I was playing around with serial options a bit but trying to disable the default DM_SERIAL seemed to create just more mayhem and would probably need even more header config settings when saving 26 bytes. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
