Hi Heiko, On 20 March 2017 at 05:40, Heiko Stuebner <he...@sntech.de> wrote: > The ARMCLK starts at 24MHz on the rk3188 which makes u-boot startup > unnecessary slow. We can easily switch to 600MHz without involving > the pmic and thus do this in the SPL to also make the rc4-decoding > of the U-Boot image faster. > > Some smaller fixes also turned up while adding the ARMCLK-support. > > It's currently based on Simon's spl-working branch and Kever's > spl_early_init patch, as that includes the last missing rk3188 > patches and also keeps uboot starting on rk3188.
This should be in mainline now so can you also please test against that? > > Tested on a rk3188 radxarock. > > > Heiko Stuebner (8): > rockchip: rk3188: sdram: Set correct sdram base > rockchip: rk3188: Decode the actual amount of ram > rockchip: rk3188: Cleanup some SPL/TPL rename leftovers > rockchip: clk: rk3188: Allow configuration of the armclk > rockchip: rk3188: Setup the armclk in spl > rockchip: rk3188: Switch to new i2c IP blocks > rockchip: i2c: Add compatibles for Rockchip Cortex-A9 socs > rockchip: Enable pmic options and act8846 driver on rk3188 rock boards > > arch/arm/include/asm/arch-rockchip/cru_rk3188.h | 1 + > arch/arm/mach-rockchip/rk3188-board-spl.c | 45 ++++++++++++++++++ > arch/arm/mach-rockchip/rk3188-board-tpl.c | 6 +-- > arch/arm/mach-rockchip/rk3188-board.c | 18 ++++++- > arch/arm/mach-rockchip/rk3188/sdram_rk3188.c | 2 +- > configs/rock_defconfig | 4 ++ > drivers/clk/rockchip/clk_rk3188.c | 63 > +++++++++++++++++++++++++ > drivers/i2c/rk_i2c.c | 2 + > 8 files changed, 135 insertions(+), 6 deletions(-) > > -- > 2.11.0 > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
