Hi Jagan, Did you put J3 to connect 1-2?
Jumper Boot Selection 1 - 2 Do not boot from SPI NOR (default) 2 - 3 Boot from SPI NOR > -----Original Message----- > From: Jagan Teki [mailto:ja...@openedev.com] > Sent: Wednesday, March 01, 2017 8:56 PM > To: u-boot@lists.denx.de > Cc: Peng Fan <peng....@nxp.com>; Stefano Babic <sba...@denx.de> > Subject: Re: [U-Boot] i.MX6QP sd boot issue > > + ML > > On Wed, Mar 1, 2017 at 6:23 PM, Jagan Teki <ja...@openedev.com> wrote: > > Hi Peng and All, > > > > I'm trying to boot from SD, on imx6qplus sabre board. > > > > - SW6: D1-D8 => 0100 0010 > > - SD card on SD3 > > - D12 with USB-to-Serial 115200 8N1 > > - Power supply Output 5V > > > > Build: > > $ make mx6qpsabreauto_defconfig; make $ dd if=u-boot.imx of=/dev/sda > > bs=512 seek=2 > > > > When I plug-in power, power supply slot D1, D2 are green and D3 glow > > red not able to get the log on uart. > > > > Any help? > > thanks! > -- > Jagan Teki > Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream > Maintainer Hyderabad, India. Regards, Peng. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot
