On 02/27/2017 04:01 AM, Rask Ingemann Lambertsen wrote: > An X-Powers AXP806 or AXP808 PMIC is usually found on boards using the > Allwinner A80 ARM SoC. This patch adds support for the PMIC's regulators > and sets up the runtime address and master/slave mode in pmic_bus_init(). > > AXP806/AXP808 support is enabled by default on all MACH_SUN9I boards. > > Because there are boards with both an AXP806 and an AXP809, > drivers/power/Kconfig and arch/arm/mach-sunxi/pmic_bus.c are changed to > make it possible to have more than one PMIC enabled at a time. > > Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk> > --- > This patch needs to be tested on the following boards which I don't have: > Cubietech Cubieboard4 > Merrii A80 Optimus >
As ChenYu, This patch need to separate to some more patches. Best Regards, Jaehoon Chung > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot
