> -----Ursprüngliche Nachricht----- > Von: Michal Simek [mailto:michal.si...@xilinx.com] > > On 17.2.2017 10:21, Michal Simek wrote: > > On 17.2.2017 08:33, stefan.herbrechtsme...@weidmueller.com wrote: > >> Hi Michal, > >> > >>> -----Ursprüngliche Nachricht----- > >>> Von: Michal Simek [mailto:michal.si...@xilinx.com] > >>>> > >>> Hi Stefan, > >>> > >>> On 6.2.2017 11:14, stefan.herbrechtsme...@weidmueller.com wrote: > >>>> Hi Michal, > >>>> > >>>>> -----Ursprüngliche Nachricht----- > >>>>> Von: stefan.herbrechtsme...@weidmueller.com > >>>>> > >>>>> The old platform clock driver use a dynamic array which is filled > >>>>> at every boot with static clock tree information and unused clock > >>> rates. > >>>>> This needs much memory and complicates the strip down for the > SPL. > >>>>> The new clock framework driver contains the tree information in > >>>>> functions and reads clock rates on demand. > >>>>> > >>>> > >>>> Any comments on this patch series? > >>> > >>> I was sick the whole last week and catching emails. > >>> I have tried it on zc702 and it didn't work for me that's why I > will > >>> have closer look hopefully this week. Definitely sorry for delay. > >> > >> Could you describe the problem. Maybe I could help. > > > > On zybo I am getting this. > > > > failed to get clock > > failed to get clock > > No serial driver found > > Interesting. I have rebased trees and it started to work on > zybo/zc702/zc706/microzed. >
I assume a SPL malloc problem because of the additional "u-boot,dm-pre-reloc" entries inside the device tree. Maybe we need to increase the CONFIG_SYS_SPL_MALLOC_SIZE. Regards, Stefan Kommanditgesellschaft - Sitz: Detmold - Amtsgericht Lemgo HRA 2790 - Komplementärin: Weidmüller Interface Führungsgesellschaft mbH - Sitz: Detmold - Amtsgericht Lemgo HRB 3924; Geschäftsführer: José Carlos Álvarez Tobar, Elke Eckstein, Dr. Peter Köhler, Jörg Timmermann; USt-ID-Nr. DE124599660 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
