On 17.2.2017 10:21, Michal Simek wrote: > On 17.2.2017 08:33, stefan.herbrechtsme...@weidmueller.com wrote: >> Hi Michal, >> >>> -----Ursprüngliche Nachricht----- >>> Von: Michal Simek [mailto:michal.si...@xilinx.com] >>>> >>> Hi Stefan, >>> >>> On 6.2.2017 11:14, stefan.herbrechtsme...@weidmueller.com wrote: >>>> Hi Michal, >>>> >>>>> -----Ursprüngliche Nachricht----- >>>>> Von: stefan.herbrechtsme...@weidmueller.com >>>>> >>>>> The old platform clock driver use a dynamic array which is filled at >>>>> every boot with static clock tree information and unused clock >>> rates. >>>>> This needs much memory and complicates the strip down for the SPL. >>>>> The new clock framework driver contains the tree information in >>>>> functions and reads clock rates on demand. >>>>> >>>> >>>> Any comments on this patch series? >>> >>> I was sick the whole last week and catching emails. >>> I have tried it on zc702 and it didn't work for me that's why I will >>> have closer look hopefully this week. Definitely sorry for delay. >> >> Could you describe the problem. Maybe I could help. > > On zybo I am getting this. > > failed to get clock > failed to get clock > No serial driver found
Interesting. I have rebased trees and it started to work on zybo/zc702/zc706/microzed. I will rebuild all targets and let you know. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
