CONFIG_SPL_ABORT_ON_RAW_IMAGE causes SPL to abort and move on when it
encounters RAW images, express this same functionality as a positive
option enabling support for RAW images: CONFIG_SPL_RAW_IMAGE_SUPPORT
Signed-off-by: Andrew F. Davis <a...@ti.com>
---
Kconfig | 7 +++++++
README | 4 ----
common/spl/spl.c | 9 +++++----
include/configs/imx6_spl.h | 4 ++--
include/configs/socfpga_de1_soc.h | 2 +-
include/spl.h | 2 +-
6 files changed, 16 insertions(+), 12 deletions(-)
diff --git a/Kconfig b/Kconfig
index 8f9ea97f3d..8ce2d8c3bb 100644
--- a/Kconfig
+++ b/Kconfig
@@ -291,6 +291,13 @@ config SYS_TEXT_BASE
help
TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture
+config SPL_RAW_IMAGE_SUPPORT
+ bool "Support SPL loading and booting of RAW images"
+ default y
+ help
+ SPL will support loading and booting a RAW image when this option
+ is y. If this is not set, SPL will move on to other available
+ boot media to find a suitable image.
config SYS_CLK_FREQ
depends on ARC || ARCH_SUNXI
diff --git a/README b/README
index ecb1710d01..127c77c4e2 100644
--- a/README
+++ b/README
@@ -3298,10 +3298,6 @@ FIT uImage format:
consider that a completely unreadable NAND block is bad,
and thus should be skipped silently.
- CONFIG_SPL_ABORT_ON_RAW_IMAGE
- When defined, SPL will proceed to another boot method
- if the image it has loaded does not have a signature.
-
CONFIG_SPL_RELOC_STACK
Adress of the start of the stack SPL will use after
relocation. If unspecified, this is equal to
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 766fb3d6f4..d564d4d2a2 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -146,16 +146,17 @@ int spl_parse_image_header(struct spl_image_info
*spl_image,
}
#endif
-#ifdef CONFIG_SPL_ABORT_ON_RAW_IMAGE
- /* Signature not found, proceed to other boot methods. */
- return -EINVAL;
-#else
+#ifdef CONFIG_SPL_RAW_IMAGE_SUPPORT
/* Signature not found - assume u-boot.bin */
debug("mkimage signature not found - ih_magic = %x\n",
header->ih_magic);
spl_set_header_raw_uboot(spl_image);
+#else
+ /* RAW image not supported, proceed to other boot methods. */
+ return -EINVAL;
#endif
}
+
return 0;
}
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index c5a035fccf..acaf81b6b9 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -45,14 +45,14 @@
#if defined(CONFIG_SPL_MMC_SUPPORT)
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+#undef CONFIG_SPL_RAW_IMAGE_SUPPORT
#endif
/* SATA support */
#if defined(CONFIG_SPL_SATA_SUPPORT)
#define CONFIG_SPL_SATA_BOOT_DEVICE 0
#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+#undef CONFIG_SPL_RAW_IMAGE_SUPPORT
#endif
/* Define the payload for FAT/EXT support */
diff --git a/include/configs/socfpga_de1_soc.h
b/include/configs/socfpga_de1_soc.h
index 5e7a712cf5..52d292b752 100644
--- a/include/configs/socfpga_de1_soc.h
+++ b/include/configs/socfpga_de1_soc.h
@@ -51,6 +51,6 @@
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+#undef CONFIG_SPL_RAW_IMAGE_SUPPORT
#endif /* __CONFIG_TERASIC_DE1_SOC_H__ */
diff --git a/include/spl.h b/include/spl.h
index bde44374ea..270798c988 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -85,7 +85,7 @@ void spl_set_header_raw_uboot(struct spl_image_info
*spl_image);
* This parses the legacy image header information at @header and sets up
* @spl_image according to what is found. If no image header is found, then
* a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is
- * enabled, then this causes a panic. If CONFIG_SPL_ABORT_ON_RAW_IMAGE is
+ * enabled, then this causes a panic. If CONFIG_SPL_RAW_IMAGE_SUPPORT is not
* enabled then U-Boot gives up. Otherwise U-Boot sets up the image using
* spl_set_header_raw_uboot(), or possibly the bootz header.
*
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
