Enable early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com>
---
Changes in v2: None
board/atmel/sama5d3xek/sama5d3xek.c | 15 ++++++++++++++-
configs/sama5d3xek_mmc_defconfig | 6 ++++++
configs/sama5d3xek_nandflash_defconfig | 6 ++++++
configs/sama5d3xek_spiflash_defconfig | 6 ++++++
4 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c
b/board/atmel/sama5d3xek/sama5d3xek.c
index a3486437bd..6bd4a688e7 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -13,6 +13,7 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
+#include <debug_uart.h>
#include <lcd.h>
#include <linux/ctype.h>
#include <atmel_hlcdc.h>
@@ -212,12 +213,24 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_LCD */
-int board_early_init_f(void)
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
{
at91_seriald_hw_init();
+}
+#endif
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#else
+ at91_seriald_hw_init();
+#endif
return 0;
}
+#endif
int board_init(void)
{
diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig
index d8556ab607..a8345520be 100644
--- a/configs/sama5d3xek_mmc_defconfig
+++ b/configs/sama5d3xek_mmc_defconfig
@@ -47,6 +47,12 @@ CONFIG_SPI_FLASH_ATMEL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=0
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
diff --git a/configs/sama5d3xek_nandflash_defconfig
b/configs/sama5d3xek_nandflash_defconfig
index 7cf875d92b..2e53ee947f 100644
--- a/configs/sama5d3xek_nandflash_defconfig
+++ b/configs/sama5d3xek_nandflash_defconfig
@@ -46,6 +46,12 @@ CONFIG_SPI_FLASH_ATMEL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=0
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
diff --git a/configs/sama5d3xek_spiflash_defconfig
b/configs/sama5d3xek_spiflash_defconfig
index 7906fe7330..6f26b4b5cc 100644
--- a/configs/sama5d3xek_spiflash_defconfig
+++ b/configs/sama5d3xek_spiflash_defconfig
@@ -46,6 +46,12 @@ CONFIG_SPI_FLASH_ATMEL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=0
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_DM_SPI=y
CONFIG_ATMEL_SPI=y
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
