On 02/06/2017 02:30 PM, Alex G. wrote: > > > On 02/06/2017 11:47 AM, Andrew F. Davis wrote: >> On 02/06/2017 01:02 PM, Alex G. wrote: >>> On 02/06/2017 07:56 AM, Andrew F. Davis wrote: >>>> On 02/03/2017 05:42 PM, Alexandru Gagniuc wrote: >>>>> The Adaptrum ACRS2 mainboard uses a Vitesse VSC8601 PHY. >>>>> >>>>> Signed-off-by: Alexandru Gagniuc <ale...@adaptrum.com> >>>>> --- >>>>> include/configs/am335x_evm.h | 1 + >>>>> 1 file changed, 1 insertion(+) >>>>> >>>>> diff --git a/include/configs/am335x_evm.h >>>>> b/include/configs/am335x_evm.h >>>>> index cd42601..b0014cf 100644 >>>>> --- a/include/configs/am335x_evm.h >>>>> +++ b/include/configs/am335x_evm.h >>>>> @@ -366,6 +366,7 @@ >>>>> #define CONFIG_PHY_SMSC >>>>> /* Enable Atheros phy driver */ >>>>> #define CONFIG_PHY_ATHEROS >>>>> +#define CONFIG_PHY_VITESSE >>>>> >>>> >>>> These PHY symbols should instead be moved to Kconfig, lets try not to >>>> add anything new to the config headers :) >>> >>> The whole PHY_ seclection does seem like it could use a major rework. I >>> was hoping to not have to touch Kconfig in this series, but if that is >>> the will, I shall yield. >>> >> >> It's really not so bad, have you ever used tools/moveconfig.py? Just >> define the symbol in kconfig and it will do all the work for you. The >> more people forced to at least try it out the quicker we can finish with >> this the conversion. > > I did try this for PHYLIB, and got a bunch of > > Compiler is missing. Do nothing. > > I got that for every single defconfig, so I gave up on it. >
Yeah, this is the only hard part, you need compilers for each supported platform. You can use buildman to grab most of them, my path ends up like this: export PATH=~/.buildman-toolchains/blackfin/opt/uClinux/bfin-elf/bin/:~/.buildman-toolchains/gcc-4.2.4-nolibc/avr32-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/am33_2.0-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/alpha-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/hppa-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/m68k-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/powerpc64-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/sparc-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/xtensa-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/s390x-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/ia64-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/frv-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/mips-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/i386-linux/bin/:~/.buildman-to olchains/gcc-4.9.0-nolibc/ppc64le-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/m32r-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/hppa64-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/h8300-elf/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin/:~/.buildman-toolchains/gcc-4.9.0-nolibc/mips64-linux/bin/:~/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/bin/:~/.buildman-toolchains/arc/arc_gnu_2016.03_prebuilt_uclibc_le_archs_linux_install/bin/:~/.buildman-toolchains/gcc-4.6.2-nolibc/tilegx-linux/bin/:~/.buildman-toolchains/sh/renesas-2012.09/bin/:~/.buildman-toolchains/gcc-4.6.3-nolibc/crisv32-linux/bin/:~/.buildman-toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin/:~/.buildman-toolchains/gcc-4.6.3-nolibc/cris-linux/bin/:~/.buildman-toolchains/gcc-4.6.3-nolibc/sh4-linux/bin/:$PATH Then you should be good! Andrew P.S. I would bundle these all up and send them to you, but it ends up being several GB of data... > Alex > >> Andrew >> >>> Alex >>> >>>> >>>> Andrew >>>> >>>>> /* >>>>> * NOR Size = 16 MiB >>>>> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
