Dear Tom, In message <[email protected]> you wrote: > The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0: > Daniel Gorsulowski (1): > at91: Update MEESC board support > > are available in the git repository at: > > git://git.denx.de/u-boot-arm master-sync > > Eric Benard (3): > CPU9260 : fix machine ID when using a CPU9G20. > fix CPU9260/CPU9G20 compile warnings > main.c: In function 'abortboot':
Ummm... This is a terrible commit message, and even worse, I cannot find any trace of this patch in the mailing lists? Where is it coming from? > Minkyu Kang (4): > s5pc1xx: support Samsung s5pc1xx SoC > s5pc1xx: support onenand driver > s5pc1xx: support serial driver > s5pc1xx: add support SMDKC100 board > > Nishanth Menon (4): > OMAP3: export enable_gpmc_cs_config to board files > OMAP3: fix warnings when NAND/ONENAND is not used > OMAP3: Fix SDRC init > TI OMAP3: make gpmc_config as const > > Sandeep Paulraj (13): > TI DaVinci DM355: Fix Compilation warning for DM355 EVM > TI DaVinci DM365: Fix Compilation warning for DM365 EVM > TI DaVinci DM646x: Adding initial support for DM6467 EVM > TI: DaVinci: DM355 Leopard board support > TI DaVinci: Maintainer for DM355 and DM365 EVM > TI: OMAP3: Remove SZ_xx references > TI DaVinci DM355: Add Config option for 64 bit Support > TI DaVinci DM365: Add Config option for 64 bit Support > TI DaVinci DVEVM: Add Config option for 64 bit Support > TI DaVinci Sonata: Add Config option for 64 bit Support > TI DaVinci: DM355 Leopard: Fix compilation warning > TI DaVinci: Fix DM6467 EVM Compilation Warning > TI DaVinci: Adding Copyright for DM365 EVM > > Simon Kagstrom (1): > arm926ejs: 8-byte align stack to avoid LDRD/STRD problems > > Steve Sakoman (2): > TI: OMAP3: Refactors the SM911x driver And where is this patch coming from? Again, I canot see a trace of it in the mailing list archive, and anyway, it must go through the net custodian, or at least have Ben's blessing (Acked-by: line). > OMAP3: Update Overo and Beagle environment > > Tom Rix (2): > Zoom2 Fix serial gpmc setup > TI OMAP3 SDP3430: Initial Support > > [email protected] (5): > CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards > Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code > Clean-up of s3c24x0 header files > Clean-up of s3c24x0 drivers excluding nand driver > Clean-up of s3c24x0 nand driver > > MAINTAINERS | 12 + > MAKEALL | 4 + > Makefile | 12 + > board/davinci/dm355evm/dm355evm.c | 4 +- > board/davinci/dm355leopard/Makefile | 52 ++ > board/davinci/dm355leopard/config.mk | 6 + > board/davinci/dm355leopard/dm355leopard.c | 98 +++ > board/davinci/dm365evm/dm365evm.c | 5 +- > board/davinci/dm6467evm/Makefile | 52 ++ > board/davinci/dm6467evm/config.mk | 2 + > board/davinci/dm6467evm/dm6467evm.c | 31 + > board/eukrea/cpu9260/cpu9260.c | 2 +- > board/logicpd/zoom2/zoom2.c | 5 +- > board/mpl/vcma9/vcma9.c | 13 +- > board/mpl/vcma9/vcma9.h | 20 +- > board/samsung/smdk2400/smdk2400.c | 5 +- > board/samsung/smdk2410/smdk2410.c | 5 +- > board/samsung/smdkc100/Makefile | 55 ++ > board/samsung/smdkc100/config.mk | 16 + > board/samsung/smdkc100/lowlevel_init.S | 215 +++++ > board/samsung/smdkc100/mem_setup.S | 197 +++++ > board/samsung/smdkc100/onenand.c | 83 ++ > board/samsung/smdkc100/smdkc100.c | 51 ++ > board/sbc2410x/sbc2410x.c | 7 +- > board/ti/sdp3430/Makefile | 49 ++ > board/ti/sdp3430/config.mk | 33 + > board/ti/sdp3430/sdp.c | 204 +++++ > board/ti/sdp3430/sdp.h | 417 +++++++++ > board/trab/cmd_trab.c | 12 +- > board/trab/rs485.c | 12 +- > board/trab/trab.c | 17 +- > board/trab/trab_fkt.c | 26 +- > board/trab/tsc2000.c | 17 +- > board/trab/tsc2000.h | 4 +- > board/trab/vfd.c | 12 +- > common/serial.c | 18 + > cpu/arm920t/s3c24x0/interrupts.c | 4 +- > cpu/arm920t/s3c24x0/speed.c | 42 +- > cpu/arm920t/s3c24x0/timer.c | 110 ++-- > cpu/arm920t/s3c24x0/usb.c | 30 +- > cpu/arm920t/s3c24x0/usb_ohci.c | 1323 > +++++++++++++++-------------- > cpu/arm920t/s3c24x0/usb_ohci.h | 209 +++--- > cpu/arm920t/start.S | 63 +- > cpu/arm926ejs/start.S | 1 + > cpu/arm_cortexa8/omap3/mem.c | 21 +- > cpu/arm_cortexa8/omap3/sys_info.c | 2 +- > cpu/arm_cortexa8/s5pc1xx/Makefile | 53 ++ > cpu/arm_cortexa8/s5pc1xx/cache.c | 43 + > cpu/arm_cortexa8/s5pc1xx/clock.c | 308 +++++++ > cpu/arm_cortexa8/s5pc1xx/cpu_info.c | 57 ++ > cpu/arm_cortexa8/s5pc1xx/reset.S | 47 + > cpu/arm_cortexa8/s5pc1xx/timer.c | 195 +++++ > doc/README.s5pc1xx | 56 ++ > drivers/i2c/s3c24x0_i2c.c | 273 +++--- > drivers/mtd/nand/s3c2410_nand.c | 62 +- > drivers/mtd/onenand/Makefile | 1 + > drivers/mtd/onenand/samsung.c | 636 ++++++++++++++ > drivers/net/smc911x.c | 12 +- > drivers/rtc/s3c24x0_rtc.c | 130 ++-- > drivers/serial/Makefile | 1 + > drivers/serial/serial_s3c24x0.c | 160 ++-- > drivers/serial/serial_s5pc1xx.c | 195 +++++ > include/asm-arm/arch-davinci/hardware.h | 2 + > include/asm-arm/arch-omap3/cpu.h | 1 + > include/asm-arm/arch-omap3/mem.h | 8 +- > include/asm-arm/arch-omap3/sys_proto.h | 2 + > include/asm-arm/arch-s5pc1xx/clk.h | 32 + > include/asm-arm/arch-s5pc1xx/clock.h | 94 ++ > include/asm-arm/arch-s5pc1xx/cpu.h | 72 ++ > include/asm-arm/arch-s5pc1xx/gpio.h | 129 +++ > include/asm-arm/arch-s5pc1xx/power.h | 42 + > include/asm-arm/arch-s5pc1xx/pwm.h | 59 ++ > include/asm-arm/arch-s5pc1xx/uart.h | 47 + > include/configs/cpu9260.h | 1 + > include/configs/cpuat91.h | 4 +- > include/configs/davinci_dm355evm.h | 1 + > include/configs/davinci_dm355leopard.h | 162 ++++ > include/configs/davinci_dm365evm.h | 2 + > include/configs/davinci_dm6467evm.h | 132 +++ > include/configs/davinci_dvevm.h | 1 + > include/configs/davinci_sonata.h | 1 + > include/configs/devkit8000.h | 15 +- > include/configs/omap3_beagle.h | 42 +- > include/configs/omap3_evm.h | 15 +- > include/configs/omap3_overo.h | 42 +- > include/configs/omap3_pandora.h | 15 +- > include/configs/omap3_sdp3430.h | 369 ++++++++ > include/configs/omap3_zoom1.h | 15 +- > include/configs/omap3_zoom2.h | 15 +- > include/configs/sbc2410x.h | 4 +- > include/configs/smdk2400.h | 4 +- > include/configs/smdk2410.h | 4 +- > include/configs/smdkc100.h | 242 ++++++ > include/configs/trab.h | 12 +- > include/linux/mtd/onenand.h | 1 + > include/linux/mtd/onenand_regs.h | 4 + > include/linux/mtd/samsung_onenand.h | 131 +++ > include/s3c2400.h | 494 +---------- > include/s3c2410.h | 159 +--- > include/s3c24x0.h | 605 ++------------ > include/serial.h | 7 + > 101 files changed, 6329 insertions(+), 2465 deletions(-) > create mode 100644 board/davinci/dm355leopard/Makefile > create mode 100644 board/davinci/dm355leopard/config.mk > create mode 100644 board/davinci/dm355leopard/dm355leopard.c > create mode 100644 board/davinci/dm6467evm/Makefile > create mode 100644 board/davinci/dm6467evm/config.mk > create mode 100644 board/davinci/dm6467evm/dm6467evm.c > create mode 100644 board/samsung/smdkc100/Makefile > create mode 100644 board/samsung/smdkc100/config.mk > create mode 100644 board/samsung/smdkc100/lowlevel_init.S > create mode 100644 board/samsung/smdkc100/mem_setup.S > create mode 100644 board/samsung/smdkc100/onenand.c > create mode 100644 board/samsung/smdkc100/smdkc100.c > create mode 100644 board/ti/sdp3430/Makefile > create mode 100644 board/ti/sdp3430/config.mk > create mode 100644 board/ti/sdp3430/sdp.c > create mode 100644 board/ti/sdp3430/sdp.h > create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile > create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c > create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c > create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c > create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S > create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c > create mode 100644 doc/README.s5pc1xx > create mode 100644 drivers/mtd/onenand/samsung.c > create mode 100644 drivers/serial/serial_s5pc1xx.c > create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h > create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h > create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h > create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h > create mode 100644 include/asm-arm/arch-s5pc1xx/power.h > create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h > create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h > create mode 100644 include/configs/davinci_dm355leopard.h > create mode 100644 include/configs/davinci_dm6467evm.h > create mode 100644 include/configs/omap3_sdp3430.h > create mode 100644 include/configs/smdkc100.h > create mode 100644 include/linux/mtd/samsung_onenand.h Sorry, put on hold until I understand what's going on with the two patches above. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Cleverness and Style have no place in getting a project completed. -- Tom Christiansen _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
