On 27/01/2017 09:54, Jagan Teki wrote: > From: Jagan Teki <ja...@amarulasolutions.com> > > Add I2C support for Engicam Is.IoT MX6UL module. > > isiotmx6ul> i2c bus > Bus 0: i2c@021a0000 > Bus 1: i2c@021a4000 > isiotmx6ul> i2c dev 0 > Setting bus to 0 > isiotmx6ul> i2c dev > Current bus is 0 > isiotmx6ul> i2c speed 100000 > Setting bus speed to 100000 Hz > isiotmx6ul> i2c probe > Valid chip addresses: 00 2C 44 78 > isiotmx6ul> i2c md 2C 0xff > 00ff: 00 00 00 00 0f f0 01 64 ff ff 00 00 00 00 00 00 .......d........ > > Cc: Stefano Babic <sba...@denx.de> > Cc: Matteo Lisi <matteo.l...@engicam.com> > Cc: Michael Trimarchi <mich...@amarulasolutions.com> > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > --- > arch/arm/cpu/armv7/mx6/Kconfig | 1 + > configs/imx6ul_isiot_mmc_defconfig | 2 ++ > 2 files changed, 3 insertions(+) > > diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig > index 72780d7..b81e18c 100644 > --- a/arch/arm/cpu/armv7/mx6/Kconfig > +++ b/arch/arm/cpu/armv7/mx6/Kconfig > @@ -211,6 +211,7 @@ config TARGET_MX6UL_ISIOT > select OF_CONTROL > select DM > select DM_GPIO > + select DM_I2C > select DM_MMC > select DM_THERMAL > select SUPPORT_SPL > diff --git a/configs/imx6ul_isiot_mmc_defconfig > b/configs/imx6ul_isiot_mmc_defconfig > index 66eb59f..7a7be23 100644 > --- a/configs/imx6ul_isiot_mmc_defconfig > +++ b/configs/imx6ul_isiot_mmc_defconfig > @@ -21,6 +21,7 @@ CONFIG_SYS_PROMPT="isiotmx6ul> " > # CONFIG_CMD_IMLS is not set > CONFIG_CMD_MEMTEST=y > CONFIG_CMD_MMC=y > +CONFIG_CMD_I2C=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_CACHE=y > CONFIG_CMD_EXT2=y > @@ -29,6 +30,7 @@ CONFIG_CMD_EXT4_WRITE=y > CONFIG_CMD_FAT=y > CONFIG_CMD_FS_GENERIC=y > # CONFIG_BLK is not set > +CONFIG_SYS_I2C_MXC=y > # CONFIG_DM_MMC_OPS is not set > CONFIG_PINCTRL=y > CONFIG_PINCTRL_IMX6=y >
Reviewed-by: Stefano Babic <sba...@denx.de> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
