On 01/24/2017 09:23 PM, Westergreen, Dalon wrote: > On Tue, 2017-01-24 at 21:16 -0600, Dinh Nguyen wrote: >> >> On 01/24/2017 09:11 PM, Westergreen, Dalon wrote: >>> >>> On Tue, 2017-01-24 at 21:08 -0600, Dinh Nguyen wrote: >>>> >>>> >>>> On 01/24/2017 11:05 AM, Dalon Westergreen wrote: >>>>> >>>>> >>>>> From: Dalon Westergreen <dalon.westergr...@intel.com> >>>>> >>>>> Remove the default environment as it is now in a common >>>>> header. >>>>> >>>>> Add the CONFIG_DEFAULT_DEVICE_TREE to the board's defconfig >>>>> to set the linux devicetree name. >>>>> >>>>> Signed-off-by: Dalon Westergreen <dalon.westergr...@intel.com> >>>>> --- >>>>> configs/socfpga_de0_nano_soc_defconfig | 3 +-- >>>>> include/configs/socfpga_de0_nano_soc.h | 19 +------------------ >>>>> 2 files changed, 2 insertions(+), 20 deletions(-) >>>>> >>>>> diff --git a/configs/socfpga_de0_nano_soc_defconfig >>>>> b/configs/socfpga_de0_nano_soc_defconfig >>>>> index af41e1e..4837809 100644 >>>>> --- a/configs/socfpga_de0_nano_soc_defconfig >>>>> +++ b/configs/socfpga_de0_nano_soc_defconfig >>>>> @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 >>>>> CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y >>>>> CONFIG_SPL_STACK_R_ADDR=0x00800000 >>>>> CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc" >>>>> +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_sockit.dtb" >>>> >>>> This should be socfpga_cyclone5_de0_nano_soc.dtb >>>> >>> No, just checked the dts in the kernel source. it is >>> socfpga_cyclone5_de0_sockit.dts. I can change this to >>> what you like, but my intent had been to match names >>> in the kernel source where possible. >>> >> >> This is U-Boot: check under U-Boot's arch/arm/dts/ >> >> socfpga_cyclone5_sockit.dtb is for the sockit >> socfpga_cyclone5_de0_nano_soc.dtb is for the DE0 Nano board. >> >> >> commit 55c7a765f63ab10b9a3b8cbd38bf1483901a7b36 >> Author: Dinh Nguyen <dingu...@opensource.altera.com> >> Date: Tue Sep 1 17:41:52 2015 -0500 >> >> arm: socfpga: Add support for the Terasic DE-0 Atlas board >> >> Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is >> CycloneV based board. The board can boot from SD/MMC. Ethernet is also >> supported. >> >> > Ah, i see. I was under the impression CONFIG_DEFAULT_FDT_FILE > was only being used for the uboot env and CONFIG_DEFAULT_DEVICE_TREE > was for the dts being used by uboot. I am using > CONFIG_DEFAULT_FDT_FILE to set the uboot env fdtimage > variable. Is that not the case? >
No, you're right! I got confused..see follow up message. Dinh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
