On Tue, 2017-01-24 at 21:16 -0600, Dinh Nguyen wrote: > > On 01/24/2017 09:11 PM, Westergreen, Dalon wrote: > > > > On Tue, 2017-01-24 at 21:08 -0600, Dinh Nguyen wrote: > > > > > > > > > On 01/24/2017 11:05 AM, Dalon Westergreen wrote: > > > > > > > > > > > > From: Dalon Westergreen <dalon.westergr...@intel.com> > > > > > > > > Remove the default environment as it is now in a common > > > > header. > > > > > > > > Add the CONFIG_DEFAULT_DEVICE_TREE to the board's defconfig > > > > to set the linux devicetree name. > > > > > > > > Signed-off-by: Dalon Westergreen <dalon.westergr...@intel.com> > > > > --- > > > > configs/socfpga_de0_nano_soc_defconfig | 3 +-- > > > > include/configs/socfpga_de0_nano_soc.h | 19 +------------------ > > > > 2 files changed, 2 insertions(+), 20 deletions(-) > > > > > > > > diff --git a/configs/socfpga_de0_nano_soc_defconfig > > > > b/configs/socfpga_de0_nano_soc_defconfig > > > > index af41e1e..4837809 100644 > > > > --- a/configs/socfpga_de0_nano_soc_defconfig > > > > +++ b/configs/socfpga_de0_nano_soc_defconfig > > > > @@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 > > > > CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y > > > > CONFIG_SPL_STACK_R_ADDR=0x00800000 > > > > CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc" > > > > +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_sockit.dtb" > > > > > > This should be socfpga_cyclone5_de0_nano_soc.dtb > > > > > No, just checked the dts in the kernel source. it is > > socfpga_cyclone5_de0_sockit.dts. I can change this to > > what you like, but my intent had been to match names > > in the kernel source where possible. > > > > This is U-Boot: check under U-Boot's arch/arm/dts/ > > socfpga_cyclone5_sockit.dtb is for the sockit > socfpga_cyclone5_de0_nano_soc.dtb is for the DE0 Nano board. > > > commit 55c7a765f63ab10b9a3b8cbd38bf1483901a7b36 > Author: Dinh Nguyen <dingu...@opensource.altera.com> > Date: Tue Sep 1 17:41:52 2015 -0500 > > arm: socfpga: Add support for the Terasic DE-0 Atlas board > > Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is > CycloneV based board. The board can boot from SD/MMC. Ethernet is also > supported. > > Ah, i see. I was under the impression CONFIG_DEFAULT_FDT_FILE was only being used for the uboot env and CONFIG_DEFAULT_DEVICE_TREE was for the dts being used by uboot. I am using CONFIG_DEFAULT_FDT_FILE to set the uboot env fdtimage variable. Is that not the case?
> Dinh > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot -- ------------------------------------------ Dalon Westergreen Embedded Specialist Intel Programmable Solutions Group Phone : 1.858.202.3518 ------------------------------------------ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
