I have a new fresh Q8 A33 tablet but different from previous two it have native MIPI DSI interface, there is working in progress to support MIPI DSI interface in u-boot ?
lcd_fex [lcd0_para] lcd_used = 1 lcd_driver_name = "tm1280X800" lcd_if = 4 lcd_x = 800 lcd_y = 1280 lcd_width = 120 lcd_height = 160 lcd_dclk_freq = 78 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 96 lcd_ht = 961 lcd_hspw = 48 lcd_vbp = 12 lcd_vt = 1322 lcd_vspw = 4 lcd_dsi_if = 0 lcd_dsi_lane = 4 lcd_dsi_format = 0 lcd_dsi_te = 0 lcd_lvds_if = 0 lcd_lvds_colordepth = 0 lcd_lvds_mode = 0 lcd_frm = 1 lcd_hv_clk_phase = 0 lcd_hv_sync_polarity = 0 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0 deu_mode = 0 lcdgamma4iep = 22 smart_color = 90 lcd_bl_en = port:PH06<1><0><default><1> lcd_power = port:power2<1><0><default><1> lcd_power_1 = "axp22_eldo1" lcd_gpio_0 = port:PH07<1><0><default><1> Thank silviop _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
