From: Yuan Yao <yao.y...@nxp.com>
The default configuration for QSPI AHB bus can't support 16MB+.
But some flash on NXP layerscape board are more than 16MB.
Signed-off-by: Yuan Yao <yao.y...@nxp.com>
---
Changed in v2:
Remove the CONFIG_QSPI_AHB_INIT into Kconfig.
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 38 ++++++++++++++++++++++
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 1 +
configs/ls1012afrdm_qspi_defconfig | 1 +
configs/ls1012aqds_qspi_defconfig | 1 +
configs/ls1012ardb_qspi_defconfig | 1 +
configs/ls1046ardb_qspi_defconfig | 1 +
scripts/config_whitelist.txt | 1 +
9 files changed, 52 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 94ec8d5..f078712 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -71,6 +71,13 @@ config NUM_DDR_CONTROLLERS
default 3 if ARCH_LS2080A
default 1
+config QSPI_AHB_INIT
+ bool "Init the QSPI AHB bus"
+ help
+ The default setting for QSPI AHB bus just support 3bytes addressing.
+ But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
+ bus for those flashes to support the full QSPI flash size.
+
config SYS_FSL_IFC_BANK_COUNT
int "Maximum banks of Integrated flash controller"
depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 6c42387..44927b1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -373,6 +373,41 @@ void fsl_lsch2_early_init_f(void)
}
#endif
+#ifdef CONFIG_QSPI_AHB_INIT
+/* Enable 4bytes address support and fast read */
+int qspi_ahb_init(void)
+{
+ u32 *qspi_lut, lut_key, *qspi_key;
+
+ qspi_key = (void *)CONFIG_SYS_QSPI_ADDR + 0x300;
+ qspi_lut = (void *)CONFIG_SYS_QSPI_ADDR + 0x310;
+
+ lut_key = in_be32(qspi_key);
+
+ if (lut_key == 0x5af05af0) {
+ /* That means the register is BE */
+ out_be32(qspi_key, 0x5af05af0);
+ out_be32(qspi_key + 1, 0x00000002);
+ out_be32(qspi_lut, 0x0820040c);
+ out_be32(qspi_lut + 1, 0x1c080c08);
+ out_be32(qspi_lut + 2, 0x00002400);
+ out_be32(qspi_key, 0x5af05af0);
+ out_be32(qspi_key + 1, 0x00000001);
+ } else {
+ /* That means the register is LE */
+ out_le32(qspi_key, 0x5af05af0);
+ out_le32(qspi_key + 1, 0x00000002);
+ out_le32(qspi_lut, 0x0820040c);
+ out_le32(qspi_lut + 1, 0x1c080c08);
+ out_le32(qspi_lut + 2, 0x00002400);
+ out_le32(qspi_key, 0x5af05af0);
+ out_le32(qspi_key + 1, 0x00000001);
+ }
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
@@ -382,6 +417,9 @@ int board_late_init(void)
#ifdef CONFIG_CHAIN_OF_TRUST
fsl_setenv_chain_of_trust();
#endif
+#ifdef CONFIG_QSPI_AHB_INIT
+ qspi_ahb_init();
+#endif
return 0;
}
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index d88543d..a28b1fd 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -18,6 +18,7 @@
#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
#define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR + 0x00400000)
#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
+#define CONFIG_SYS_QSPI_ADDR (CONFIG_SYS_IMMR + 0x00550000)
#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR +
0x00510000)
#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 2df56f7..e0cf0e4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -19,6 +19,7 @@
#define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR (CONFIG_SYS_IMMR + 0x00300000)
#define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR (CONFIG_SYS_IMMR + 0x00310000)
#define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR (CONFIG_SYS_IMMR + 0x00370000)
+#define CONFIG_SYS_QSPI_ADDR (CONFIG_SYS_IMMR + 0x010c0000)
#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x01140000)
#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x01240000)
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR +
0x011C0500)
diff --git a/configs/ls1012afrdm_qspi_defconfig
b/configs/ls1012afrdm_qspi_defconfig
index 1f3d487..c83b2eb 100644
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -34,3 +34,4 @@ CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y
diff --git a/configs/ls1012aqds_qspi_defconfig
b/configs/ls1012aqds_qspi_defconfig
index c0514ae..27bccd1 100644
--- a/configs/ls1012aqds_qspi_defconfig
+++ b/configs/ls1012aqds_qspi_defconfig
@@ -38,3 +38,4 @@ CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y
diff --git a/configs/ls1012ardb_qspi_defconfig
b/configs/ls1012ardb_qspi_defconfig
index 13c9f21..459682d 100644
--- a/configs/ls1012ardb_qspi_defconfig
+++ b/configs/ls1012ardb_qspi_defconfig
@@ -38,3 +38,4 @@ CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_QSPI_AHB_INIT=y
diff --git a/configs/ls1046ardb_qspi_defconfig
b/configs/ls1046ardb_qspi_defconfig
index 8508c09..fa17373 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -24,3 +24,4 @@ CONFIG_SPI_FLASH=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
+CONFIG_QSPI_AHB_INIT=y
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index d0b5e7f..8dd3e4b 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -7340,6 +7340,7 @@ CONFIG_SYS_QRIO_BASE
CONFIG_SYS_QRIO_BASE_PHYS
CONFIG_SYS_QRIO_BR_PRELIM
CONFIG_SYS_QRIO_OR_PRELIM
+CONFIG_SYS_QSPI_ADDR
CONFIG_SYS_R7780MP_OLD_FLASH
CONFIG_SYS_RAMBOOT
CONFIG_SYS_RAM_BASE
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
