Verification has to be done before booting any images on HS devices. So
default the boot to FIT on HS devices.
Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
---
board/ti/am57xx/board.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 226752e..c63c693 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -463,6 +463,14 @@ int board_late_init(void)
* This is the POWERHOLD-in-Low behavior.
*/
palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
+
+ /*
+ * Default FIT boot on HS devices. Non FIT images are not allowed
+ * on HS devices.
+ */
+ if (get_device_type() == HS_DEVICE)
+ setenv("boot_fit", "1");
+
return 0;
}
--
2.10.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
