The lib_[arch]/board.c code calls the bb_miiphy_init that will do just 2 things:
1) Relocate the bb_mii_buses[i].* hooks (.init, .mdio_active, .delay, ...) 2) Call the board bb_mii_buses[i].init (board specific code). The board specifc code will be contained into the hook .init filed into the bb_mii_buses vector. Do you have a better solution? thanks and best regards, luigi On Mon, Oct 5, 2009 at 8:30 AM, Ben Warren <biggerbadder...@gmail.com> wrote: > Hi Luigi, > > Luigi 'Comio' Mantellini wrote: >> >> From: Luigi 'Comio' Mantellini <luigi.mantell...@idf-hit.com> >> >> Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantell...@idf-hit.com> >> --- >> lib_arm/board.c | 3 +++ >> lib_avr32/board.c | 3 +++ >> lib_blackfin/board.c | 3 +++ >> lib_i386/board.c | 3 +++ >> lib_m68k/board.c | 3 +++ >> lib_mips/board.c | 3 +++ >> lib_ppc/board.c | 4 +++- >> lib_sh/board.c | 3 +++ >> lib_sparc/board.c | 3 +++ >> 9 files changed, 27 insertions(+), 1 deletions(-) >> > > I'm not sure about this. Bit-banged MII is very board-specific, and IMHO > should be initialized in board_eth_init() > > regards, > Ben > -- Luigi 'Comio' Mantellini R&D - Software Industrie Dial Face S.p.A. Via Canzo, 4 20068 Peschiera Borromeo (MI), Italy Tel.: +39 02 5167 2813 Fax: +39 02 5167 2459 web: www.idf-hit.com mail: luigi.mantell...@idf-hit.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
