On Tue, 22 Nov 2016 13:38:39 +0100 Maxime Ripard <maxime.rip...@free-electrons.com> wrote:
> From: Hans de Goede <hdego...@redhat.com> > > Enable the NAND and UBI support in the configuration header so that we can > (finally) use it. > > Signed-off-by: Hans de Goede <hdego...@redhat.com> > Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com> > --- > board/sunxi/Kconfig | 8 ++++++++ > include/configs/sunxi-common.h | 14 ++++++++++++++ > 2 files changed, 22 insertions(+), 0 deletions(-) > > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig > index e1d4ab148f08..c6a620a20167 100644 > --- a/board/sunxi/Kconfig > +++ b/board/sunxi/Kconfig > @@ -460,6 +460,14 @@ config AXP_GPIO > ---help--- > Say Y here to enable support for the gpio pins of the axp PMIC ICs. > > +if NAND_SUNXI > +config CMD_NAND > + default y > + > +config CMD_UBI > + default y > +endif > + > config VIDEO > bool "Enable graphical uboot console on HDMI, LCD or VGA" > depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && > !MACH_SUN50I > diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h > index fd2677ba14a4..feedd9f8811b 100644 > --- a/include/configs/sunxi-common.h > +++ b/include/configs/sunxi-common.h > @@ -132,6 +132,20 @@ > #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 > #define CONFIG_SYS_NAND_ONFI_DETECTION > #define CONFIG_SYS_MAX_NAND_DEVICE 8 > + > +#define CONFIG_MTD_DEVICE > +#define CONFIG_MTD_PARTITIONS > +#endif > + > +#ifdef CONFIG_CMD_NAND > +#define CONFIG_CMD_NAND_TRIMFFS > +#endif > + > +#ifdef CONFIG_CMD_UBI > +#define CONFIG_CMD_UBIFS > + > +#define CONFIG_RBTREE > +#define CONFIG_LZO > #endif > > #ifdef CONFIG_SPL_SPI_SUNXI Shouldn't we add all these MTD/NAND/UBI/UBIFS related options in Kconfig too? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
