On 2016-11-17 17:14, Simon Glass wrote:
> Hi Stefan,
>
> On 15 November 2016 at 14:02, Stefan Agner <ste...@agner.ch> wrote:
>> From: Stefan Agner <stefan.ag...@toradex.com>
>>
>> Some devices (e.g. dra7xx) support loading to RAM using DFU without
>> having direct boot from RAM support. Make sure the linker list
>> does not contain BOOT_DEVICE_RAM if CONFIG_SPL_RAM_SUPPORT is not
>> enabled.
>>
>> Fixes: 98136b2f26fa ("spl: Convert spl_ram_load_image() to use linker list")
>>
>> Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
>> ---
>>
>> Changes in v3: None
>> Changes in v2:
>> - Use CONFIG_SPL_RAM_SUPPORT to descide whether to compile the
>> function in first place.
>>
>> common/spl/spl.c | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/common/spl/spl.c b/common/spl/spl.c
>> index bdb165a..ef17619 100644
>> --- a/common/spl/spl.c
>> +++ b/common/spl/spl.c
>> @@ -174,7 +174,7 @@ __weak void __noreturn jump_to_image_no_args(struct
>> spl_image_info *spl_image)
>> # define CONFIG_SPL_LOAD_FIT_ADDRESS 0
>> #endif
>>
>> -#if defined(CONFIG_SPL_RAM_DEVICE) || defined(CONFIG_SPL_DFU_SUPPORT)
>> +#if defined(CONFIG_SPL_RAM_SUPPORT) || defined(CONFIG_SPL_DFU_SUPPORT)
I just realized that this patch is wrong, the config option is currently
named "CONFIG_SPL_RAM_DEVICE". I will send a v4.
>> static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
>> ulong count, void *buf)
>
> Can this be moved into its own file?
>
Hm, we discussed that on v2:
https://www.mail-archive.com/u-boot@lists.denx.de/msg230689.html
I planned to post a separate patch for that.
For the separate patch, how should I do this? CONFIG_SPL_RAM_DEVICE is
still old config, so I guess I would first have to move that to Kconfig.
What is CONFIG_SPL_RAM_DEVICE actually doing? I think it means that the
image to boot is already there? (loaded by boot ROM?)
CONFIG_SPL_RAM_SUPPORT "Enable booting directly from RAM"
CONFIG_SPL_RAM_DEVICE depends on CONFIG_SPL_RAM_SUPPORT "Image preloaded
by ROM"
CONFIG_SPL_DFU_SUPPORT depends on CONFIG_SPL_RAM_SUPPORT "Load image via
DFU"
--
Stefan
>> {
>> @@ -220,7 +220,9 @@ static int spl_ram_load_image(struct spl_image_info
>> *spl_image,
>>
>> return 0;
>> }
>> +#if defined(CONFIG_SPL_RAM_SUPPORT)
>> SPL_LOAD_IMAGE_METHOD(0, BOOT_DEVICE_RAM, spl_ram_load_image);
>> +#endif
>> #if defined(CONFIG_SPL_DFU_SUPPORT)
>> SPL_LOAD_IMAGE_METHOD(0, BOOT_DEVICE_DFU, spl_ram_load_image);
>> #endif
>> --
>> 2.10.2
>>
>
> Regards,
> Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
