Dear Christopher Beley, In message <4ac7ada4.2080...@wisc.edu> you wrote: > > I'm trying to gentoo running on the Media5200 but am running into issues > getting my kernel to boot. I am able to boot the kernel that came with > freescale's BSP for the device, but when I boot my kernel things stall > after Uncompressing Kernel Image: > > ## Booting image at 00400000 ... > Image Name: Linux-2.6.30-mpc52xx > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 2315154 Bytes = 2.2 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK
I don't see any message about loading the device tree blob here? > I'm not completely sure why my kernel isn't booting while freescale's is. I > should have all the correct drivers enabled, but after uncompress kernel > Image nothing shows up in the console or on screen (the freescale logo/u-boot > screen stays on the scree > n though). I tried increasing the starting address for kicks, but that made > no differnce. I also tried doing something like: Maybe you are using different image types? > tftp 400000; bootm 400000 > > but that gave me the same results as well. > > Yes, I am using uImage and not cuImage. With uImage, you need to load the device tree as well and pass it's address as argument to bootm . Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "If the code and the comments disagree, then both are probably wrong." - Norm Schryer _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
