On 11/07/2016 09:44 PM, Yao Yuan wrote: > On 11/08/2016 12:46 PM, York Sun wrote: >> On 11/07/2016 07:52 PM, Yuan Yao wrote: >>> From: Yuan Yao <yao.y...@nxp.com> >>> >>> Signed-off-by: Yuan Yao <yao.y...@nxp.com> >>> --- >>> Changed in v2: >>> Move the readme for QSPI deploy out of only for ls2080aqds. >>> --- >>> .../arm/cpu/armv8/fsl-layerscape/doc/README.deploy | 44 >>> ++++++++++++++++++++++ >>> 1 file changed, 44 insertions(+) >>> create mode 100644 >>> arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy >>> >>> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy >>> b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy >>> new file mode 100644 >>> index 0000000..25813b3 >>> --- /dev/null >>> +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy >>> @@ -0,0 +1,44 @@ >>> +Boot source support Overview >>> +------------------- >>> + 1. LS1043A >>> + LS1043AQDS:QSPI, SD, NOR, NAND >>> + LS1043ARDB:SD, NOR, NAND >>> + 2. LS2080A >>> + LS2080AQDS:QSPI, SD, NOR, NAND >>> + LS2080ARDB:NOR, NAND >>> + 3. LS1012A >>> + LS1012AQDS:QSPI >>> + LS1012ARDB:QSPI >>> + 4. LS1046A >>> + LS1046AQDS:QSPI, SD, NOR, NAND >>> + LS1046ARDB:QSPI, SD >>> + >> >> If you plan to add all SD/NAND/QSPI into this document, it is OK to call it >> README.deploy. Otherwise it may be better to name as README.qspi. >> > I'm not be familiar with SD/NAND boot. So should I rename as README.qspi? > Or just keep it but waiting for some others to add SD/NAND boot in another > patch? >
We already have NAND boot explained in other document. Stick with the procedure you are trying to explain. Keep it simple and we can expand it when necessary. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
