On 11/08/2016 12:46 PM, York Sun wrote: > On 11/07/2016 07:52 PM, Yuan Yao wrote: > > From: Yuan Yao <yao.y...@nxp.com> > > > > Signed-off-by: Yuan Yao <yao.y...@nxp.com> > > --- > > Changed in v2: > > Move the readme for QSPI deploy out of only for ls2080aqds. > > --- > > .../arm/cpu/armv8/fsl-layerscape/doc/README.deploy | 44 > > ++++++++++++++++++++++ > > 1 file changed, 44 insertions(+) > > create mode 100644 > > arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy > > > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy > > b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy > > new file mode 100644 > > index 0000000..25813b3 > > --- /dev/null > > +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.deploy > > @@ -0,0 +1,44 @@ > > +Boot source support Overview > > +------------------- > > + 1. LS1043A > > + LS1043AQDS:QSPI, SD, NOR, NAND > > + LS1043ARDB:SD, NOR, NAND > > + 2. LS2080A > > + LS2080AQDS:QSPI, SD, NOR, NAND > > + LS2080ARDB:NOR, NAND > > + 3. LS1012A > > + LS1012AQDS:QSPI > > + LS1012ARDB:QSPI > > + 4. LS1046A > > + LS1046AQDS:QSPI, SD, NOR, NAND > > + LS1046ARDB:QSPI, SD > > + > > If you plan to add all SD/NAND/QSPI into this document, it is OK to call it > README.deploy. Otherwise it may be better to name as README.qspi. > I'm not be familiar with SD/NAND boot. So should I rename as README.qspi? Or just keep it but waiting for some others to add SD/NAND boot in another patch?
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
