On Tue, 8 Nov 2016 17:21:16 +0100 Maxime Ripard <maxime.rip...@free-electrons.com> wrote:
> Introduce a new sunxi-spl-with-ecc.bin image with already the right header, > ECC, randomizer and padding for the BROM to be able to read it. > > It needs to be flashed using a raw access to the NAND so that the > controller doesn't change a thing to it, since we already have all the > right parameters. > > Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com> Acked-by: Boris Brezillon <boris.brezil...@free-electrons.com> > --- > Makefile | 3 +++ > scripts/Makefile.spl | 12 ++++++++++++ > 2 files changed, 15 insertions(+), 0 deletions(-) > > diff --git a/Makefile b/Makefile > index 37cbcb28f75e..12a248e297b5 100644 > --- a/Makefile > +++ b/Makefile > @@ -1345,6 +1345,9 @@ spl/u-boot-spl: tools prepare \ > spl/sunxi-spl.bin: spl/u-boot-spl > @: > > +spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin > + @: > + > spl/u-boot-spl.sfp: spl/u-boot-spl > @: > > diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl > index e0b0117dc9b6..b41b4e427cc5 100644 > --- a/scripts/Makefile.spl > +++ b/scripts/Makefile.spl > @@ -168,6 +168,7 @@ endif > > ifdef CONFIG_ARCH_SUNXI > ALL-y += $(obj)/sunxi-spl.bin > +ALL-y += $(obj)/sunxi-spl-with-ecc.bin > endif > > ifeq ($(CONFIG_SYS_SOC),"at91") > @@ -276,6 +277,17 @@ cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@ > $(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE > $(call if_changed,mksunxiboot) > > +quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@ > +cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \ > + -c > $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \ > + -p $(CONFIG_SYS_NAND_PAGE_SIZE) \ > + -o $(CONFIG_SYS_NAND_OOBSIZE) \ > + -u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \ > + -e $(CONFIG_SYS_NAND_BLOCK_SIZE) \ > + -s -b $< $@ > +$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin > + $(call if_changed,sunxi_spl_image_builder) > + > # Rule to link u-boot-spl > # May be overridden by arch/$(ARCH)/config.mk > quiet_cmd_u-boot-spl ?= LD $@ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
