Dear Kim Phillips, In message <20090926212320.6a29616b.kim.phill...@freescale.com> you wrote: > On Fri, 25 Sep 2009 18:39:46 -0500 > Kim Phillips <kim.phill...@freescale.com> wrote: > > > I might just ask you to pull the "retain POR values" patch, but it's > > too close to the window, and I want to give the opportunity for a good > > review cycle on it. > > At least Heiko commented on it, and I fixed and tested it ok, so please > now pull:
OK. > The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724: > Wolfgang Denk (1): > mpc5121ads: fix breakage introduced when reordering > elpida_mddrc_config[] > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc83xx.git master > > Anton Vorontsov (5): > net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs > net: uec: Fix uccf.h and uec.h headers to include headers they depend on > mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available > mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 > CPUs > mpc83xx: mpc8360emds: Add QE USB device tree fixups > > Kim Phillips (1): > mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR > bitfields > > Paul Gortmaker (1): > sbc8349: tidy up Makefile to use new configuration script. > > Makefile | 15 +-- > board/freescale/mpc8360emds/mpc8360emds.c | 73 ++++++++- > cpu/mpc83xx/cpu_init.c | 261 > +++++++++++++++++------------ > drivers/qe/uccf.h | 1 + > drivers/qe/uec.h | 4 + > drivers/qe/uec_phy.c | 15 ++- > include/configs/MPC8313ERDB.h | 3 +- > include/configs/MPC8315ERDB.h | 3 +- > include/configs/MPC8323ERDB.h | 3 +- > include/configs/MPC832XEMDS.h | 3 +- > include/configs/MPC8349EMDS.h | 3 +- > include/configs/MPC8349ITX.h | 3 +- > include/configs/MPC8360EMDS.h | 9 +- > include/configs/MPC8360ERDK.h | 3 +- > include/configs/MPC837XEMDS.h | 3 +- > include/configs/MPC837XERDB.h | 3 +- > include/configs/MVBLM7.h | 3 +- > include/configs/SIMPC8313.h | 4 +- > include/configs/TQM834x.h | 3 +- > include/configs/kmeter1.h | 4 +- > include/configs/sbc8349.h | 18 ++- > include/configs/vme8349.h | 3 +- > 22 files changed, 292 insertions(+), 148 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de ...the increased productivity fostered by a friendly environment and quality tools is essential to meet ever increasing demands for software. - M. D. McIlroy, E. N. Pinson and B. A. Tague _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
