Dear Kim Phillips, In message <20090925183946.1a30eefe.kim.phill...@freescale.com> you wrote: > Hi WD, > > Please pull some minor enhancements for 83xx: > > The following changes since commit 984f10baac8ef6032df52f135943d6b0bc96f724: > Wolfgang Denk (1): > mpc5121ads: fix breakage introduced when reordering > elpida_mddrc_config[] > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc83xx.git master > > Anton Vorontsov (5): > net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs > net: uec: Fix uccf.h and uec.h headers to include headers they depend on > mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available > mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 > CPUs > mpc83xx: mpc8360emds: Add QE USB device tree fixups > > Paul Gortmaker (1): > sbc8349: tidy up Makefile to use new configuration script. > > Makefile | 15 +------ > board/freescale/mpc8360emds/mpc8360emds.c | 73 > ++++++++++++++++++++++++++--- > drivers/qe/uccf.h | 1 + > drivers/qe/uec.h | 4 ++ > drivers/qe/uec_phy.c | 15 +++++- > include/configs/MPC8360EMDS.h | 6 ++- > include/configs/sbc8349.h | 15 ++++++ > 7 files changed, 104 insertions(+), 25 deletions(-)
Applied, thanks. > I might just ask you to pull the "retain POR values" patch, but it's > too close to the window, and I want to give the opportunity for a good > review cycle on it. OK, apply when you feel it's OK. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "Who alone has reason to *lie himself out* of actuality? He who *suffers* from it." - Friedrich Nietzsche _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
