Hi everybody, I try to bring up fw_setenv / fw_printenv in linux kernel but first it want to start with u-boot itself. I built most recent u-boot-marvell git source and get a running u-boot with standard openrd configuration. So far so good.
version says: ArtistaNET-III>> version U-Boot 2009.08-00208-g9ef0569-dirty (Sep 29 2009 - 15:42:42) OpenRD_base But saveenv will not work as expected. setenv of new parameter will work but after saveenv and reboot the new parameter is lost and u-boot complains about wrong CRC again. Any help would be very appreciated. Dieter _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
