On "fastboot reboot-bootloader" we check "dofastboot" variable and do
"fastboot 0" command in U-Boot if it's 1. But there are boards which have
USB controller number other than 0, so it should be respected when
performing "fastboot" command.
This patch reuses CONFIG_FASTBOOT_USB_DEV option toprovide correct USB
controller number to "fastboot" command.
Signed-off-by: Sam Protsenko <semen.protse...@linaro.org>
---
Changes in v2:
- Remove unnecessary check for CONFIG_FASTBOOT_USB_DEV
include/configs/ti_omap5_common.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/configs/ti_omap5_common.h
b/include/configs/ti_omap5_common.h
index 29b7d96..b85fae3 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -114,7 +114,8 @@
"if test ${dofastboot} -eq 1; then " \
"echo Boot fastboot requested, resetting dofastboot ...;" \
"setenv dofastboot 0; saveenv;" \
- "echo Booting into fastboot ...; fastboot 0;" \
+ "echo Booting into fastboot ...; " \
+ "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
"fi;" \
"run findfdt; " \
"run envboot; " \
--
2.9.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
