>From: Stefano Babic [mailto:sba...@denx.de] >Sent: Montag, 17. Oktober 2016 09:32 > >On 07/10/2016 18:14, linux-kernel-...@beckhoff.com wrote: >> From: Patrick Bruenn <p.bru...@beckhoff.com> >> >> Add CX9020 board based on mx53loco. >> Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse >> serial_mxc with DTE and prepare for device tree migration of other >> functions and imx53 devices. >> >> The CX9020 differs from i.MX53 Quick Start Board by: >> - use uart2 instead of uart1 >> - DVI-D connector instead of VGA >> - no audio >> - CCAT FPGA connected to emi >> - enable rtc >> >> Signed-off-by: Patrick Bruenn <p.bru...@beckhoff.com> >> >> --- > >> + >> +#ifndef __CONFIG_H >> +#define __CONFIG_H >> + >> +#define CONFIG_MX53 >> + >> +#define CONFIG_DISPLAY_BOARDINFO >> + > >This results to be defined twice (default is enabled, resulting in a >warning by building the board. If you agree, I fix it myself before >applying. > Sure I am fine with that. Thanks and regards, Patrick
Signed-off-by: Patrick Bruenn <p.bru...@beckhoff.com> Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff Registered office: Verl, Germany | Register court: Guetersloh HRA 7075 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
