On 07/10/2016 18:14, linux-kernel-...@beckhoff.com wrote: > From: Patrick Bruenn <p.bru...@beckhoff.com> > > Add CX9020 board based on mx53loco. > Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse > serial_mxc with DTE and prepare for device tree migration of other > functions and imx53 devices. > > The CX9020 differs from i.MX53 Quick Start Board by: > - use uart2 instead of uart1 > - DVI-D connector instead of VGA > - no audio > - CCAT FPGA connected to emi > - enable rtc > > Signed-off-by: Patrick Bruenn <p.bru...@beckhoff.com> > > ---
> + > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#define CONFIG_MX53 > + > +#define CONFIG_DISPLAY_BOARDINFO > + This results to be defined twice (default is enabled, resulting in a warning by building the board. If you agree, I fix it myself before applying. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
