Hi Jagan, On Thu, Sep 29, 2016 at 05:38:32PM +0530, Jagan Teki wrote: >Hi Peng, > >On Mon, Jun 20, 2016 at 7:15 AM, Peng Fan <van.free...@gmail.com> wrote: >> Hi Simon, >> >> On Fri, Jun 17, 2016 at 04:59:49PM -0600, Simon Glass wrote: >>>Hi Peng, >>> >>>On 17 June 2016 at 00:19, Peng Fan <van.free...@gmail.com> wrote: >>>> Support driver model for ehci mx6 driver. >>>> Consolidate code to be shared between DM and non-DM, such as >>>> introducing ehci_mx6_common_init. >>>> For simplicity, some old fasion code are keeped for DM usage, >>>> such as board_ehci_power and board_usb_phy_mode. And 'dr-mode', >>>> usbphy and vbus handling code for DM is not added now. >>>> These will be added in future patches. >>>> >>>> Signed-off-by: Peng Fan <peng....@nxp.com> >>>> Cc: Marek Vasut <ma...@denx.de> >>>> Cc: Mateusz Kulikowski <mateusz.kulikow...@gmail.com> >>>> Cc: Stefan Agner <ste...@agner.ch> >>>> Cc: Simon Glass <s...@chromium.org> >>>> --- >>>> drivers/usb/host/ehci-mx6.c | 144 >>>> +++++++++++++++++++++++++++++++++++++++----- >>>> 1 file changed, 130 insertions(+), 14 deletions(-) >>> >>>Reviewed-by: Simon Glass <s...@chromium.org> >>> >>>Good start. Do you have a plan to drop the board_...() functions? >> >> Yeah. I'll drop the board_ functions for dt+dm for ehci-mx6 in following >> up patches. > >Have you tested this? Do we have any board that using this dm driver. >It's not working for me may be I would have add vbus-supply or >something.
Sorry for late reply. I tested it. I have not upstream any board that use this dm driver. The board_ functions are needed when you using this driver, I did not remove this. Regards, Peng. > >thanks! >-- >Jagan Teki >Free Software Engineer | www.openedev.com >U-Boot, Linux | Upstream Maintainer >Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot