Hi Peng, On Mon, Jun 20, 2016 at 7:15 AM, Peng Fan <van.free...@gmail.com> wrote: > Hi Simon, > > On Fri, Jun 17, 2016 at 04:59:49PM -0600, Simon Glass wrote: >>Hi Peng, >> >>On 17 June 2016 at 00:19, Peng Fan <van.free...@gmail.com> wrote: >>> Support driver model for ehci mx6 driver. >>> Consolidate code to be shared between DM and non-DM, such as >>> introducing ehci_mx6_common_init. >>> For simplicity, some old fasion code are keeped for DM usage, >>> such as board_ehci_power and board_usb_phy_mode. And 'dr-mode', >>> usbphy and vbus handling code for DM is not added now. >>> These will be added in future patches. >>> >>> Signed-off-by: Peng Fan <peng....@nxp.com> >>> Cc: Marek Vasut <ma...@denx.de> >>> Cc: Mateusz Kulikowski <mateusz.kulikow...@gmail.com> >>> Cc: Stefan Agner <ste...@agner.ch> >>> Cc: Simon Glass <s...@chromium.org> >>> --- >>> drivers/usb/host/ehci-mx6.c | 144 >>> +++++++++++++++++++++++++++++++++++++++----- >>> 1 file changed, 130 insertions(+), 14 deletions(-) >> >>Reviewed-by: Simon Glass <s...@chromium.org> >> >>Good start. Do you have a plan to drop the board_...() functions? > > Yeah. I'll drop the board_ functions for dt+dm for ehci-mx6 in following > up patches.
Have you tested this? Do we have any board that using this dm driver. It's not working for me may be I would have add vbus-supply or something. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
