Remove ramdisk_addr, ramdisk_size and update UART baud-rate.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivast...@nxp.com>
---
Changes for v3 :Incorporated York's comments
        - Removed hwconfig variable

Changes for v2 :
        - Removed "initrd_high=0xffffffff\0"
        - Removed console variable

 include/configs/ls1012a_common.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 5fb6c47..58ca75e 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -105,19 +105,14 @@
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
-       "initrd_high=0xffffffff\0"              \
        "verify=no\0"                           \
-       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
        "loadaddr=0x80100000\0"                 \
        "kernel_addr=0x100000\0"                \
-       "ramdisk_addr=0x800000\0"               \
-       "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xffffffffffffffff\0"         \
        "initrd_high=0xffffffffffffffff\0"      \
        "kernel_start=0xa00000\0"               \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
-       "console=ttyAMA0,38400n8\0"
 
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/ram0 " \
                                "earlycon=uart8250,mmio,0x21c0500"
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to