Init the clock rate to CONFIG_ROCKCHIP_SDHCI_MAX_FREQ with clock driver
api.

Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---

 drivers/mmc/rockchip_sdhci.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c
index c56e1a3..e787343 100644
--- a/drivers/mmc/rockchip_sdhci.c
+++ b/drivers/mmc/rockchip_sdhci.c
@@ -12,6 +12,7 @@
 #include <libfdt.h>
 #include <malloc.h>
 #include <sdhci.h>
+#include <clk.h>
 
 /* 400KHz is max freq for card ID etc. Use that as min */
 #define EMMC_MIN_FREQ  400000
@@ -33,7 +34,10 @@ static int arasan_sdhci_probe(struct udevice *dev)
        struct rockchip_sdhc *prv = dev_get_priv(dev);
        struct sdhci_host *host = &prv->host;
        int ret;
+       struct clk clk;
 
+       ret = clk_get_by_index(dev, 0, &clk);
+       clk_set_rate(&clk, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ);
        host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
 
        ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ,
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to