Dear Kumar Gala,
In message <pine.lnx.4.64.0909221206300.5...@localhost.localdomain> you wrote:
> The following changes since commit 3b6a9267f0de7b85d387fa4123d0b58379363447:
> Wolfgang Denk (1):
> board/flagadm/flash.c: fix compile warning
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> Kumar Gala (15):
> ppc/85xx: Fix LCRR_CLKDIV defines
> ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS
> ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS
> ppc/85xx: Simplify the top makefile for P1_P2_RDB boards
> ppc/85xx: Clean up p1_p2_rdb PCI setup
> ppc/85xx: Clean up p2020ds PCI setup code
> ppc/85xx: Clean up mpc8572DS PCI setup code
> ppc/85xx: Clean up use of LAWAR defines
> ppc/p4080: Add p4080 platform immap definitions
> ppc/p4080: Add support for CoreNet style platform LAWs
> ppc/p4080: CoreNet platfrom style CCSRBAR setting
> ppc/p4080: CoreNet platfrom style secondary core release
> ppc/p4080: Add various p4080 related defines (and p4040)
> ppc/p4080: Handle timebase enabling and frequency reporting
> ppc/p4080: Determine various chip frequencies on CoreNet platforms
>
> Mingkai Hu (4):
> ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds
> ppc/85xx: add ld script file for boot from NAND
> immap_85xx: add porpllsr's plat ratio definition
> ppc/85xx: add cpu init config file for boot from NAND
>
> Paul Gortmaker (12):
> sbc8548: replace README with completely new document
> sbc8548: enable use of PCI network cards
> sbc8548: delete unused MPC8548CDS info carried over from port
> sbc8548: get_clock_freq is not valid for this board
> sbc8548: enable access to second bank of flash
> sbc8548: remove eTSEC3/4 voltage hack
> sbc8548: use I/O accessors
> sbc8548: correct local bus SDRAM size from 64M to 128M
> fsl_pci: create a SET_STD_PCI_INFO() helper wrapper
> sbc8548: update PCI/PCI-e support code
> sbc8548: allow enabling PCI via a make config option
> sbc85x0: tidy up Makefile to use new configuration script.
>
> Peter Tyser (1):
> mpc8610hpcd: Use common 86xx fdt fixup code
>
> Poonam Aggrwal (1):
> ppc/85xx: 32bit DDR changes for P1020/P1011
>
> Vivek Mahajan (1):
> 85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ
There have been a few changes requested to some of these patches. I
guess you will send an updated pull request when this has been cleaned
up?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
We're all sorry for the other guy when he loses his job to a machine.
But when it comes to your job -- that's different. And it always will
be different.
-- McCoy, "The Ultimate Computer", stardate 4729.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
