Dear Kumar Gala, In message <pine.lnx.4.64.0909152219420.17...@localhost.localdomain> you wrote: > The following changes since commit 3ca55bce9c8bf00df06a20487fafc16fa2f8084b: > Marcel Ziswiler (1): > mpc8260: remove Ethernet node fixup to use generic FDT code. > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc85xx.git master > > Kumar Gala (7): > ppc/8xxx: Misc DDR related fixes > ppc/85xx: Introduce low level write_tlb function > ppc/85xx: Repack tlb_table to save space > ppc/85xx: Move code around to prep for NAND_SPL > ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL > ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL > ppc/85xx: Disable all async interrupt sources when we boot > > Mingkai Hu (2): > ppc/85xx: add boot from NAND/eSDHC/eSPI support > NAND boot: change NAND loader's relocate SP to CONFIG param > > Roy Zang (1): > ppc/85xx: Enable usb ehci support for p2020ds board > > Scott Wood (3): > ppc/85xx: Don't enable interrupts before we're ready > ppc/85xx: Ensure that MAS8 is zero when writing TLB entries. > ppc/85xx: Remove some bogus code from external interrupt handler. > > board/freescale/mpc8313erdb/mpc8313erdb.c | 2 +- > board/sheldon/simpc8313/simpc8313.c | 2 +- > cpu/mpc85xx/Makefile | 1 + > cpu/mpc85xx/cpu_init.c | 67 +++++++-------- > cpu/mpc85xx/cpu_init_early.c | 76 ++++++++++++++++ > cpu/mpc85xx/start.S | 55 +++++++++++- > cpu/mpc85xx/tlb.c | 60 ++++++------- > cpu/mpc85xx/traps.c | 9 +-- > cpu/mpc85xx/u-boot-nand.lds | 138 > +++++++++++++++++++++++++++++ > cpu/mpc8xxx/ddr/ctrl_regs.c | 10 +- > cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 4 +- > drivers/misc/fsl_law.c | 2 + > include/asm-ppc/mmu.h | 25 +++--- > include/asm-ppc/processor.h | 2 + > include/configs/MPC8313ERDB.h | 1 + > include/configs/P2020DS.h | 9 ++ > include/configs/SIMPC8313.h | 1 + > 17 files changed, 364 insertions(+), 100 deletions(-) > create mode 100644 cpu/mpc85xx/cpu_init_early.c > create mode 100644 cpu/mpc85xx/u-boot-nand.lds
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de e-credibility: the non-guaranteeable likelihood that the electronic data you're seeing is genuine rather than somebody's made-up crap. - Karl Lehenbauer _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
