On Wednesday 23 September 2009 13:51:46 Joakim Tjernlund wrote:
> NULL is an absolute value and should not be relocated.
> After this correction code like:
> void weak_fun(void) __attribute__((weak));
> printf("weak_fun:%p\n", weak_fun);
> will still print null after relocation.
>
> Signed-off-by: Joakim Tjernlund <joakim.tjernl...@transmode.se>
> ---
>
> I have only tested this on 83xx and on a somewhat older u-boot.
> The change is exactly the same on all PowerPC platforms though.
>
> cpu/mpc512x/start.S | 6 ++++--
> cpu/mpc5xx/start.S | 6 ++++--
> cpu/mpc5xxx/start.S | 6 ++++--
> cpu/mpc8220/start.S | 6 ++++--
> cpu/mpc824x/start.S | 6 ++++--
> cpu/mpc8260/start.S | 6 ++++--
> cpu/mpc83xx/start.S | 6 ++++--
> cpu/mpc85xx/start.S | 6 ++++--
> cpu/mpc86xx/start.S | 6 ++++--
> cpu/mpc8xx/start.S | 6 ++++--
Thanks. But I think you missed ppc4xx here:
cpu/ppc4xx/start.S
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
