Hi Chris,

On 19.09.2016 03:28, Chris Packham wrote:
On Mon, Sep 19, 2016 at 12:58 PM, Simon Glass <s...@chromium.org> wrote:
Hi Chris,

On 13 September 2016 at 19:42, Chris Packham <judge.pack...@gmail.com> wrote:
This board is a plug in card for Marvell's switch system development
kits. Form-factor aside it is similar to the DB-88F6820-GP with the
following differences.
- TCLK is 200MHz
- SPI1 is used
- No SATA
- No MMC
- NAND flash

Signed-off-by: Chris Packham <judge.pack...@gmail.com>
---
I've used my work email address for the MAINTAINERS entry. Mainly
because it gives a better chance at finding someone else to contact
rather than a random gmail address.

I've also left the copyright assignments to Stefan and Gregory since the
code was derived from the -GP board.

 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/armada-385-amc.dts               | 155 ++++++++++++++++++++++++++
 arch/arm/mach-mvebu/Kconfig                   |   7 ++
 board/Marvell/db-88f6820-amc/MAINTAINERS      |   6 +
 board/Marvell/db-88f6820-amc/Makefile         |   7 ++
 board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 129 +++++++++++++++++++++
 board/Marvell/db-88f6820-amc/kwbimage.cfg     |  12 ++
 configs/db-88f6820-amc_defconfig              |  38 +++++++
 include/configs/db-88f6820-amc.h              | 130 +++++++++++++++++++++
 9 files changed, 485 insertions(+)
 create mode 100644 arch/arm/dts/armada-385-amc.dts
 create mode 100644 board/Marvell/db-88f6820-amc/MAINTAINERS
 create mode 100644 board/Marvell/db-88f6820-amc/Makefile
 create mode 100644 board/Marvell/db-88f6820-amc/db-88f6820-amc.c
 create mode 100644 board/Marvell/db-88f6820-amc/kwbimage.cfg
 create mode 100644 configs/db-88f6820-amc_defconfig
 create mode 100644 include/configs/db-88f6820-amc.h

The SPL_xxx_SUPPORT options have now moved to Kconfig, but other than that:

Reviewed-by: Simon Glass <s...@chromium.org>


Hi Simon,

Thanks for the review.  I've moved the SPL_*_SUPPORT to the defconfig
locally, I'll wait to see if there are any other comments before
sending a v2.

I've just scanned your patches and and they look pretty good. So
please send a v2 and I'll pull them later this week.

Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to