Hi Chris, On 13 September 2016 at 19:42, Chris Packham <judge.pack...@gmail.com> wrote: > This board is a plug in card for Marvell's switch system development > kits. Form-factor aside it is similar to the DB-88F6820-GP with the > following differences. > - TCLK is 200MHz > - SPI1 is used > - No SATA > - No MMC > - NAND flash > > Signed-off-by: Chris Packham <judge.pack...@gmail.com> > --- > I've used my work email address for the MAINTAINERS entry. Mainly > because it gives a better chance at finding someone else to contact > rather than a random gmail address. > > I've also left the copyright assignments to Stefan and Gregory since the > code was derived from the -GP board. > > arch/arm/dts/Makefile | 1 + > arch/arm/dts/armada-385-amc.dts | 155 > ++++++++++++++++++++++++++ > arch/arm/mach-mvebu/Kconfig | 7 ++ > board/Marvell/db-88f6820-amc/MAINTAINERS | 6 + > board/Marvell/db-88f6820-amc/Makefile | 7 ++ > board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 129 +++++++++++++++++++++ > board/Marvell/db-88f6820-amc/kwbimage.cfg | 12 ++ > configs/db-88f6820-amc_defconfig | 38 +++++++ > include/configs/db-88f6820-amc.h | 130 +++++++++++++++++++++ > 9 files changed, 485 insertions(+) > create mode 100644 arch/arm/dts/armada-385-amc.dts > create mode 100644 board/Marvell/db-88f6820-amc/MAINTAINERS > create mode 100644 board/Marvell/db-88f6820-amc/Makefile > create mode 100644 board/Marvell/db-88f6820-amc/db-88f6820-amc.c > create mode 100644 board/Marvell/db-88f6820-amc/kwbimage.cfg > create mode 100644 configs/db-88f6820-amc_defconfig > create mode 100644 include/configs/db-88f6820-amc.h
The SPL_xxx_SUPPORT options have now moved to Kconfig, but other than that: Reviewed-by: Simon Glass <s...@chromium.org> Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
