On 09/07/2016 03:33 AM, Gong Qianyu wrote: > The SPL images are growing much bigger especially when DEBUG is ON. > So need to fix the values for them. > > Signed-off-by: Gong Qianyu <qianyu.g...@nxp.com> > --- > include/configs/ls1043a_common.h | 25 ++++++++++++++++--------- > 1 file changed, 16 insertions(+), 9 deletions(-) > > diff --git a/include/configs/ls1043a_common.h > b/include/configs/ls1043a_common.h > index e55fcb2..fa20e6d 100644 > --- a/include/configs/ls1043a_common.h > +++ b/include/configs/ls1043a_common.h > @@ -69,16 +69,22 @@ > #define CONFIG_SPL_SERIAL_SUPPORT > #define CONFIG_SPL_DRIVERS_MISC_SUPPORT > #define CONFIG_SPL_MMC_SUPPORT > -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0 > +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x110 > #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 > > #define CONFIG_SPL_TEXT_BASE 0x10000000 > -#define CONFIG_SPL_MAX_SIZE 0x1d000 > -#define CONFIG_SPL_STACK 0x1001e000 > -#define CONFIG_SPL_PAD_TO 0x1d000 > +/* > + * CONFIG_SPL_MAX_SIZE is limited by OCRAM memory size(128 KiB) and > + * a reserved stack size(4 KiB). > + * So notice that even if DEBUG is ON, the SPL image(spl/u-boot-spl.bin) > + * should not be > 124 KiB. > + */
Qianyu, It is good to see comment here. However, I am concerned about your calculation. Beside the image and stack, the early MMU tables are at the beginning of OCRAM. Did you count them? York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
