> -----Original Message----- > From: Gong Qianyu [mailto:[email protected]] > Sent: 2016年8月31日 18:04 > To: [email protected]; york sun <[email protected]> > Cc: Prabhakar Kushwaha <[email protected]>; Mingkai Hu > <[email protected]>; Shaohui Xie <[email protected]>; Zhiqiang Hou > <[email protected]>; Wenbin Song <[email protected]>; > Shengzhou Liu <[email protected]>; Qianyu Gong > <[email protected]> > Subject: [Patch v2 0/7] Add LS1046ARDB board support > > Hi all, > > This is version 2 patchset mainly to add support for LS1046ARDB board. > It should be based on two DDR patches to work well on LS1046ARDB. > The two patches are: > http://patchwork.ozlabs.org/patch/663534/ > http://patchwork.ozlabs.org/patch/663535/ > > PCIe and USB are not supported yet due to lack of some driver patches and I'll > add them once they're ready for upstream. > Please help to review. Thanks very much! > > Changes in v2: > - Add ERRATUM_A008511. > - Use values directly instead of macros for SATA ECC. > - Add >60 characters' paragraph for the board help. > - Fix the memory map in readme. > - Remove unused flash r/w functions. > - Remove DDR3 defines. > - Revise some commit messages.
Qianyu, the peripherals' input clock are different between LS1043A and LS1046A, so please add the patch http://sw-stash.freescale.net/users/b48286/repos/ls1046a-uboot/commits/777371b0697318ed14a7eabaf46c97d683dfce61 to fix it. Thanks, Zhiqiang _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
