On 11/08/2016 08:02, Peng Fan wrote: > This patch set is to support i.MX6ULL and i.MX6ULL 14x14 evk board. > Device tree is also included and default enabled. > > The iomux header file is also added, because we can not use pinctrl > to cover all the usecase, such as early pinmux settings. > > Since i.MX6ULL is derivative from i.MX6UL, the device tree related > files are reused from i.MX6UL, which also the same way in Linux Kernel. > The clock header for device tree is added, although there is no DM > clock driver for i.mx6/7 now, i do not want to change the device tree > a lot from Linux dts. > > Peng Fan (20): > imx: mx6ull: add iomux header file > imx: mx6ull: add mx6ull major cpu type > imx-common: introduce is_mx6ull > imx: ocotp: support i.MX6ULL > imx: timer: update gpt driver for i.MX6ULL > imx: mx6ull: skip setting ahb clock > imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ > imx: mx6ull: misc soc update > imx: mx6ull: adjust POR_B setting for i.MX6ULL > imx: mx6ull: update clock settings and CCM register map > imx: mx6ull: Update memory map address > imx: mx6ull: Add AIPS3 initialization > imx: imx6ull: adjust the ldo 1.2v bandgap voltage > imx: iomux: fix snvs usage for i.MX6ULL > pinctrl: imx6: support i.MX6ULL > arm: dts: imx6ull: add pinctrl defines > dt-bindings: add i.mx6ul clock header > arm: dts: add device tree for i.MX6ULL > dm: mmc: intialize dev when probe > arm: imx: add i.MX6ULL 14x14 EVK board support > > Ye Li (1): > imx: mx6ull: add kconfig entry for MX6ULL > > arch/arm/cpu/armv7/mx6/Kconfig | 11 + > arch/arm/cpu/armv7/mx6/clock.c | 59 +- > arch/arm/cpu/armv7/mx6/soc.c | 32 +- > arch/arm/dts/Makefile | 2 + > arch/arm/dts/imx6ul-pinfunc.h | 938 ++++++++++++++++++++++ > arch/arm/dts/imx6ull-14x14-evk.dts | 527 ++++++++++++ > arch/arm/dts/imx6ull-pinfunc-snvs.h | 29 + > arch/arm/dts/imx6ull-pinfunc.h | 57 ++ > arch/arm/dts/imx6ull.dtsi | 1161 > +++++++++++++++++++++++++++ > arch/arm/imx-common/cpu.c | 2 + > arch/arm/imx-common/init.c | 2 +- > arch/arm/imx-common/iomux-v3.c | 11 +- > arch/arm/imx-common/timer.c | 7 +- > arch/arm/include/asm/arch-imx/cpu.h | 3 +- > arch/arm/include/asm/arch-mx6/crm_regs.h | 60 +- > arch/arm/include/asm/arch-mx6/imx-regs.h | 18 +- > arch/arm/include/asm/arch-mx6/mx6-pins.h | 2 + > arch/arm/include/asm/arch-mx6/mx6ull_pins.h | 1065 ++++++++++++++++++++++++ > arch/arm/include/asm/imx-common/iomux-v3.h | 6 +- > arch/arm/include/asm/imx-common/sys_proto.h | 1 + > board/freescale/mx6ullevk/Kconfig | 12 + > board/freescale/mx6ullevk/MAINTAINERS | 6 + > board/freescale/mx6ullevk/Makefile | 6 + > board/freescale/mx6ullevk/imximage.cfg | 116 +++ > board/freescale/mx6ullevk/mx6ullevk.c | 99 +++ > configs/mx6ull_14x14_evk_defconfig | 30 + > drivers/misc/mxc_ocotp.c | 52 +- > drivers/mmc/fsl_esdhc.c | 1 + > drivers/pinctrl/nxp/pinctrl-imx6.c | 5 + > include/configs/mx6ullevk.h | 180 +++++ > include/dt-bindings/clock/imx6ul-clock.h | 253 ++++++ > 31 files changed, 4700 insertions(+), 53 deletions(-) > create mode 100644 arch/arm/dts/imx6ul-pinfunc.h > create mode 100644 arch/arm/dts/imx6ull-14x14-evk.dts > create mode 100644 arch/arm/dts/imx6ull-pinfunc-snvs.h > create mode 100644 arch/arm/dts/imx6ull-pinfunc.h > create mode 100644 arch/arm/dts/imx6ull.dtsi > create mode 100644 arch/arm/include/asm/arch-mx6/mx6ull_pins.h > create mode 100644 board/freescale/mx6ullevk/Kconfig > create mode 100644 board/freescale/mx6ullevk/MAINTAINERS > create mode 100644 board/freescale/mx6ullevk/Makefile > create mode 100644 board/freescale/mx6ullevk/imximage.cfg > create mode 100644 board/freescale/mx6ullevk/mx6ullevk.c > create mode 100644 configs/mx6ull_14x14_evk_defconfig > create mode 100644 include/configs/mx6ullevk.h > create mode 100644 include/dt-bindings/clock/imx6ul-clock.h >
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot