Hello,
While U-Boot SPL 2015.10 works fine on my allwinner,sun5i-r8 board I
face following issue with U-Boot SPL 2016.09-rc1 on it:
bash-4.3# cu -l /dev/cuaU0 -s 115200
Connected to /dev/cuaU0 (speed 115200)
U-Boot SPL 2016.09-rc1 (Jul 31 2016 - 16:37:00)
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from NAND
### ERROR ### Please RESET the board ###
Any ideas what change did cause this or where to start looking after?
Thanks,
Marcus
--
[ Marcus Glocker, mar...@nazgul.ch, http://nazgul.ch ]
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
