On 2016-08-07 23:15, maitysancha...@gmail.com wrote:
> Hello,
>
> On 16-08-03 17:13:11, Marek Vasut wrote:
>> On 08/03/2016 01:58 PM, Sanchayan Maity wrote:
>> > Add driver model support for Vybrid USB driver.
>> >
>> > Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com>
>>
>> CCing Lukasz.
>>
>> > ---
>> > Hello,
>> >
>> > I am trying to migrate the Vybrid USB driver to driver model.
>> > Patches are based on top of uboot master branch. With this
>> > implementation, host works perfectly fine on both USB ports
>> > but I have problems using it in client mode.
>> >
>> > I tried DFU to test client mode and I get the following
>> >
>> > Colibri VFxx # version
>> >
>> > U-Boot 2016.09-rc1-00235-g4e8c122 (Aug 03 2016 - 17:07:48 +0530)
>> > arm-linux-gnueabihf-gcc (Linaro GCC 5.2-2015.11-2) 5.2.1 20151005
>> > GNU ld (GNU Binutils) 2.25.0 Linaro 2015_10
>> > Colibri VFxx # dfu 0 nand 4
>> > using id 'nand0,0'
>> > using id 'nand0,1'
>> > using id 'nand0,3'
>> > g_dnl_register: failed!, error: -19
>> > data abort
>> > pc : [<8ff80f18>] lr : [<8ff612a9>]
>> > reloc pc : [<3f431f18>] lr : [<3f4122a9>]
>> > sp : 8fd15000 ip : 00000000 fp : 00002710
>> > r10: 8ffb50cc r9 : 8fd16ee8 r8 : 8ffbc574
>> > r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000
>> > r3 : 0000f4b9 r2 : 80000000 r1 : 00000001 r0 : 00000000
>> > Flags: nZCv IRQs off FIQs off Mode SVC_32
>> > Resetting CPU ...
>> >
>> > resetting ...
>
> FWIW here is output with DEBUG enabled in uclass.c
>
> when testing with DFU:
>
> uclass_find_device_by_seq: 1 0
> - -1 -1
> - -1 -1
> - not found
> g_dnl_register: failed!, error: -19
Hm, I guess this comes from usb_setup_ehci_gadget called through
usb_gadget_register_driver. The call in there seems rather hardcoded:
ret = uclass_find_device_by_seq(UCLASS_USB, 0, true, &dev);
(seq = 0, and find_req_seq=true, maybe find_req_seq=false helps? Maybe
it is because we use the second USB DR controller for OTG?)
> data abort
> pc : [<8ff80fb0>] lr : [<8ff612a9>]
> reloc pc : [<3f431fb0>] lr : [<3f4122a9>]
> sp : 8fd15000 ip : 00000000 fp : 00002710
> r10: 8ffb5274 r9 : 8fd16ee8 r8 : 8ffbc714
> r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000
> r3 : 0000f4b9 r2 : 80000000 r1 : 00000001 r0 : 00000000
> Flags: nZCv IRQs off FIQs off Mode SVC_32
> Resetting CPU ...
I guess that comes from cmd/dfu.c not handling the error code of
g_dnl_register...
--
Stefan
>
> resetting ...
>
> When testing host mode with usb start
>
> Colibri VFxx # usb start
> starting USB...
> USB0: uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 -1
> - -1 -1
> - not found
> USB EHCI 1.00
> USB1: uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 0
> - found
> uclass_find_device_by_seq: 0 1
> - -1 0
> - -1 1
> - found
> uclass_find_device_by_seq: 0 2
> - -1 0
> - -1 1
> - -1 -1
> - not found
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 0
> - found
> uclass_find_device_by_seq: 0 1
> - -1 0
> - -1 -1
> - not found
> USB EHCI 1.00
> scanning bus 0 for devices... uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 -1
> - not found
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 -1
> - not found
> 2 USB Device(s) found
> scanning bus 1 for devices... uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 0
> - found
> uclass_find_device_by_seq: 0 1
> - -1 0
> - -1 -1
> - not found
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 0
> - found
> uclass_find_device_by_seq: 0 1
> - -1 0
> - -1 1
> - found
> uclass_find_device_by_seq: 0 2
> - -1 0
> - -1 1
> - -1 -1
> - not found
> 2 USB Device(s) found
>
> Regards,
> Sanchayan.
>
>> >
>> > It seems to return ENODEV from usb_setup_ehci_gadget after calling
>> > uclass_find_device_by_seq. I am not sure what I am missing in the
>> > current implementation. Can someone point me in the correct direction?
>> > Since host works on both ports I would assume the device tree nodes
>> > are correct.
>> >
>> > Tried to look in documentation and usb-info.txt mentions that gadget
>> > framework does not use driver model. Does this imply I cannot use
>> > any usb gadget functionality if I am using USB DM? However the function
>> > usb_gadget_register_driver in ci_udc.c does have a CONFIG_DM_USB and
>> > calls into usb_setup_ehci_gadget which is in usb-uclass.c.
>> >
>> > Regards,
>> > Sanchayan.
>> > ---
>> > drivers/usb/host/ehci-vf.c | 123
>> > ++++++++++++++++++++++++++++++++++++++++++---
>> > 1 file changed, 117 insertions(+), 6 deletions(-)
>> >
>> > diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c
>> > index 61789dd..8c5c593 100644
>> > --- a/drivers/usb/host/ehci-vf.c
>> > +++ b/drivers/usb/host/ehci-vf.c
>> > @@ -8,6 +8,7 @@
>> > */
>> >
>> > #include <common.h>
>> > +#include <dm.h>
>> > #include <usb.h>
>> > #include <errno.h>
>> > #include <linux/compiler.h>
>> > @@ -131,6 +132,24 @@ int __weak board_ehci_hcd_init(int port)
>> > return 0;
>> > }
>> >
>> > +int ehci_vf_common_init(struct usb_ehci *ehci, int index)
>> > +{
>> > + int ret;
>> > +
>> > + /* Do board specific initialisation */
>> > + ret = board_ehci_hcd_init(index);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + usb_power_config(index);
>> > + usb_oc_config(index);
>> > + usb_internal_phy_clock_gate(index);
>> > + usb_phy_enable(index, ehci);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +#ifndef CONFIG_DM_USB
>> > int ehci_hcd_init(int index, enum usb_init_type init,
>> > struct ehci_hccr **hccr, struct ehci_hcor **hcor)
>> > {
>> > @@ -143,12 +162,9 @@ int ehci_hcd_init(int index, enum usb_init_type init,
>> > ehci = (struct usb_ehci *)nc_reg_bases[index];
>> >
>> > /* Do board specific initialisation */
>> > - board_ehci_hcd_init(index);
>> > -
>> > - usb_power_config(index);
>> > - usb_oc_config(index);
>> > - usb_internal_phy_clock_gate(index);
>> > - usb_phy_enable(index, ehci);
>> > + ret = ehci_vf_common_init(index);
>> > + if (ret)
>> > + return ret;
>> >
>> > *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
>> > *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
>> > @@ -175,3 +191,98 @@ int ehci_hcd_stop(int index)
>> > {
>> > return 0;
>> > }
>> > +#else
>> > +struct ehci_vf_priv_data {
>> > + struct ehci_ctrl ctrl;
>> > + struct usb_ehci *ehci;
>> > + enum usb_init_type init_type;
>> > + int portnr;
>> > +};
>> > +
>> > +static int vf_init_after_reset(struct ehci_ctrl *dev)
>> > +{
>> > + struct ehci_vf_priv_data *priv = dev->priv;
>> > + enum usb_init_type type = priv->init_type;
>> > + struct usb_ehci *ehci = priv->ehci;
>> > + int ret;
>> > +
>> > + ret = ehci_vf_common_init(priv->ehci, priv->portnr);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + if (type == USB_INIT_DEVICE)
>> > + return 0;
>> > +
>> > + setbits_le32(&ehci->usbmode, CM_HOST);
>> > + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
>> > + setbits_le32(&ehci->portsc, USB_EN);
>> > +
>> > + mdelay(10);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static const struct ehci_ops vf_ehci_ops = {
>> > + .init_after_reset = vf_init_after_reset
>> > +};
>> > +
>> > +static int ehci_usb_probe(struct udevice *dev)
>> > +{
>> > + struct usb_platdata *plat = dev_get_platdata(dev);
>> > + struct usb_ehci *ehci = (struct usb_ehci *)dev_get_addr(dev);
>> > + struct ehci_vf_priv_data *priv = dev_get_priv(dev);
>> > + struct ehci_hccr *hccr;
>> > + struct ehci_hcor *hcor;
>> > + int ret;
>> > +
>> > + priv->ehci = ehci;
>> > + priv->portnr = dev->seq;
>> > + priv->init_type = plat->init_type;
>> > +
>> > + ret = ehci_vf_common_init(ehci, priv->portnr);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + if (priv->init_type == USB_INIT_HOST) {
>> > + setbits_le32(&ehci->usbmode, CM_HOST);
>> > + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
>> > + setbits_le32(&ehci->portsc, USB_EN);
>> > + }
>> > +
>> > + mdelay(10);
>> > +
>> > + hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
>> > + hcor = (struct ehci_hcor *)((uint32_t)hccr +
>> > + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
>> > +
>> > + return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0, plat->init_type);
>> > +}
>> > +
>> > +static int ehci_usb_remove(struct udevice *dev)
>> > +{
>> > + int ret;
>> > +
>> > + ret = ehci_deregister(dev);
>> > + if (ret)
>> > + return ret;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static const struct udevice_id vf_usb_ids[] = {
>> > + { .compatible = "fsl,vf610-usb" },
>> > + { }
>> > +};
>> > +
>> > +U_BOOT_DRIVER(usb_ehci) = {
>> > + .name = "ehci_vf",
>> > + .id = UCLASS_USB,
>> > + .of_match = vf_usb_ids,
>> > + .probe = ehci_usb_probe,
>> > + .remove = ehci_usb_remove,
>> > + .ops = &ehci_usb_ops,
>> > + .platdata_auto_alloc_size = sizeof(struct usb_platdata),
>> > + .priv_auto_alloc_size = sizeof(struct ehci_vf_priv_data),
>> > + .flags = DM_FLAG_ALLOC_PRIV_DMA,
>> > +};
>> > +#endif
>> >
>>
>>
>> --
>> Best regards,
>> Marek Vasut
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
