On 08/03/2016 01:58 PM, Sanchayan Maity wrote:
> Add driver model support for Vybrid USB driver.
>
> Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com>
CCing Lukasz.
> ---
> Hello,
>
> I am trying to migrate the Vybrid USB driver to driver model.
> Patches are based on top of uboot master branch. With this
> implementation, host works perfectly fine on both USB ports
> but I have problems using it in client mode.
>
> I tried DFU to test client mode and I get the following
>
> Colibri VFxx # version
>
> U-Boot 2016.09-rc1-00235-g4e8c122 (Aug 03 2016 - 17:07:48 +0530)
> arm-linux-gnueabihf-gcc (Linaro GCC 5.2-2015.11-2) 5.2.1 20151005
> GNU ld (GNU Binutils) 2.25.0 Linaro 2015_10
> Colibri VFxx # dfu 0 nand 4
> using id 'nand0,0'
> using id 'nand0,1'
> using id 'nand0,3'
> g_dnl_register: failed!, error: -19
> data abort
> pc : [<8ff80f18>] lr : [<8ff612a9>]
> reloc pc : [<3f431f18>] lr : [<3f4122a9>]
> sp : 8fd15000 ip : 00000000 fp : 00002710
> r10: 8ffb50cc r9 : 8fd16ee8 r8 : 8ffbc574
> r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000
> r3 : 0000f4b9 r2 : 80000000 r1 : 00000001 r0 : 00000000
> Flags: nZCv IRQs off FIQs off Mode SVC_32
> Resetting CPU ...
>
> resetting ...
>
> It seems to return ENODEV from usb_setup_ehci_gadget after calling
> uclass_find_device_by_seq. I am not sure what I am missing in the
> current implementation. Can someone point me in the correct direction?
> Since host works on both ports I would assume the device tree nodes
> are correct.
>
> Tried to look in documentation and usb-info.txt mentions that gadget
> framework does not use driver model. Does this imply I cannot use
> any usb gadget functionality if I am using USB DM? However the function
> usb_gadget_register_driver in ci_udc.c does have a CONFIG_DM_USB and
> calls into usb_setup_ehci_gadget which is in usb-uclass.c.
>
> Regards,
> Sanchayan.
> ---
> drivers/usb/host/ehci-vf.c | 123
> ++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 117 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c
> index 61789dd..8c5c593 100644
> --- a/drivers/usb/host/ehci-vf.c
> +++ b/drivers/usb/host/ehci-vf.c
> @@ -8,6 +8,7 @@
> */
>
> #include <common.h>
> +#include <dm.h>
> #include <usb.h>
> #include <errno.h>
> #include <linux/compiler.h>
> @@ -131,6 +132,24 @@ int __weak board_ehci_hcd_init(int port)
> return 0;
> }
>
> +int ehci_vf_common_init(struct usb_ehci *ehci, int index)
> +{
> + int ret;
> +
> + /* Do board specific initialisation */
> + ret = board_ehci_hcd_init(index);
> + if (ret)
> + return ret;
> +
> + usb_power_config(index);
> + usb_oc_config(index);
> + usb_internal_phy_clock_gate(index);
> + usb_phy_enable(index, ehci);
> +
> + return 0;
> +}
> +
> +#ifndef CONFIG_DM_USB
> int ehci_hcd_init(int index, enum usb_init_type init,
> struct ehci_hccr **hccr, struct ehci_hcor **hcor)
> {
> @@ -143,12 +162,9 @@ int ehci_hcd_init(int index, enum usb_init_type init,
> ehci = (struct usb_ehci *)nc_reg_bases[index];
>
> /* Do board specific initialisation */
> - board_ehci_hcd_init(index);
> -
> - usb_power_config(index);
> - usb_oc_config(index);
> - usb_internal_phy_clock_gate(index);
> - usb_phy_enable(index, ehci);
> + ret = ehci_vf_common_init(index);
> + if (ret)
> + return ret;
>
> *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
> *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
> @@ -175,3 +191,98 @@ int ehci_hcd_stop(int index)
> {
> return 0;
> }
> +#else
> +struct ehci_vf_priv_data {
> + struct ehci_ctrl ctrl;
> + struct usb_ehci *ehci;
> + enum usb_init_type init_type;
> + int portnr;
> +};
> +
> +static int vf_init_after_reset(struct ehci_ctrl *dev)
> +{
> + struct ehci_vf_priv_data *priv = dev->priv;
> + enum usb_init_type type = priv->init_type;
> + struct usb_ehci *ehci = priv->ehci;
> + int ret;
> +
> + ret = ehci_vf_common_init(priv->ehci, priv->portnr);
> + if (ret)
> + return ret;
> +
> + if (type == USB_INIT_DEVICE)
> + return 0;
> +
> + setbits_le32(&ehci->usbmode, CM_HOST);
> + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
> + setbits_le32(&ehci->portsc, USB_EN);
> +
> + mdelay(10);
> +
> + return 0;
> +}
> +
> +static const struct ehci_ops vf_ehci_ops = {
> + .init_after_reset = vf_init_after_reset
> +};
> +
> +static int ehci_usb_probe(struct udevice *dev)
> +{
> + struct usb_platdata *plat = dev_get_platdata(dev);
> + struct usb_ehci *ehci = (struct usb_ehci *)dev_get_addr(dev);
> + struct ehci_vf_priv_data *priv = dev_get_priv(dev);
> + struct ehci_hccr *hccr;
> + struct ehci_hcor *hcor;
> + int ret;
> +
> + priv->ehci = ehci;
> + priv->portnr = dev->seq;
> + priv->init_type = plat->init_type;
> +
> + ret = ehci_vf_common_init(ehci, priv->portnr);
> + if (ret)
> + return ret;
> +
> + if (priv->init_type == USB_INIT_HOST) {
> + setbits_le32(&ehci->usbmode, CM_HOST);
> + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
> + setbits_le32(&ehci->portsc, USB_EN);
> + }
> +
> + mdelay(10);
> +
> + hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
> + hcor = (struct ehci_hcor *)((uint32_t)hccr +
> + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> + return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0, plat->init_type);
> +}
> +
> +static int ehci_usb_remove(struct udevice *dev)
> +{
> + int ret;
> +
> + ret = ehci_deregister(dev);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static const struct udevice_id vf_usb_ids[] = {
> + { .compatible = "fsl,vf610-usb" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(usb_ehci) = {
> + .name = "ehci_vf",
> + .id = UCLASS_USB,
> + .of_match = vf_usb_ids,
> + .probe = ehci_usb_probe,
> + .remove = ehci_usb_remove,
> + .ops = &ehci_usb_ops,
> + .platdata_auto_alloc_size = sizeof(struct usb_platdata),
> + .priv_auto_alloc_size = sizeof(struct ehci_vf_priv_data),
> + .flags = DM_FLAG_ALLOC_PRIV_DMA,
> +};
> +#endif
>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
