Dear javier Martin, In message <eedb5540909170031k7b9076eeo8d4f60c799f1a...@mail.gmail.com> you wrote: > I have tried u-boot for the imx27lite board from LogicPD which is > currently in u-boot-arm repository and I have experienced some > stability problems: > - Sometimes the system gets stuck in serial_getc() from serial_mxc.c > driver when printing information (ex. mii read ). > - Pings do not work properly, the system gets stuck in fec_send() > function waiting always for a frame to be sent (which actually does > not happen). > - Sometimes the system gets stuck when saving the environment to flash > 'saveenv', but other times it does it well.
We don't see any such issues on the board we have here in the lab. > I would like to help to solve this problems, but I don't know exactly > where to begin from. I have been reviewing clock settings. Could this > be happening because this board is using 32KHz xtal as reference > instead of 26MHz one? Yes, of course this could be a problem. Is this an original LogicPD board? Did you adapt the code for the different clock speed? What exactly did you change? > Have you experienced these problems also? No, we didn't. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Monday is an awful way to spend one seventh of your life. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
