From: Stephen Warren <swar...@nvidia.com>
Now that clock and reset drivers exist for Tegra186, we can enable the SD
card controller. Now that a BPMP I2C driver exists for Tegra186, we can
communicate with the PMIC to enable power to the SD card. Hook up the DT
content and board code required to make the SD card work.
Signed-off-by: Stephen Warren <swar...@nvidia.com>
---
arch/arm/dts/tegra186-p2771-0000-a02.dts | 5 +++++
arch/arm/dts/tegra186-p2771-0000-b00.dts | 5 +++++
arch/arm/dts/tegra186-p2771-0000.dtsi | 14 ++++++++++++++
board/nvidia/p2771-0000/p2771-0000.c | 26 ++++++++++++++++++++++++++
configs/p2771-0000-a02_defconfig | 1 +
configs/p2771-0000-b00_defconfig | 1 +
6 files changed, 52 insertions(+)
diff --git a/arch/arm/dts/tegra186-p2771-0000-a02.dts
b/arch/arm/dts/tegra186-p2771-0000-a02.dts
index 70f4326c0913..5ed3817a41c6 100644
--- a/arch/arm/dts/tegra186-p2771-0000-a02.dts
+++ b/arch/arm/dts/tegra186-p2771-0000-a02.dts
@@ -5,4 +5,9 @@
/ {
model = "NVIDIA P2771-0000 A02";
compatible = "nvidia,p2771-0000-a02", "nvidia,p2771-0000",
"nvidia,tegra186";
+
+ sdhci@3400000 {
+ cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5)
GPIO_ACTIVE_HIGH>;
+ };
};
diff --git a/arch/arm/dts/tegra186-p2771-0000-b00.dts
b/arch/arm/dts/tegra186-p2771-0000-b00.dts
index 2384a65e870a..90c99c33ccc6 100644
--- a/arch/arm/dts/tegra186-p2771-0000-b00.dts
+++ b/arch/arm/dts/tegra186-p2771-0000-b00.dts
@@ -5,4 +5,9 @@
/ {
model = "NVIDIA P2771-0000 B00";
compatible = "nvidia,p2771-0000-b00", "nvidia,p2771-0000",
"nvidia,tegra186";
+
+ sdhci@3400000 {
+ cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6)
GPIO_ACTIVE_HIGH>;
+ };
};
diff --git a/arch/arm/dts/tegra186-p2771-0000.dtsi
b/arch/arm/dts/tegra186-p2771-0000.dtsi
index 4e2b6fbf97f8..d867674fd04e 100644
--- a/arch/arm/dts/tegra186-p2771-0000.dtsi
+++ b/arch/arm/dts/tegra186-p2771-0000.dtsi
@@ -10,6 +10,8 @@
aliases {
sdhci0 = "/sdhci@3460000";
+ sdhci1 = "/sdhci@3400000";
+ i2c0 = "/bpmp/i2c";
i2c1 = "/i2c@3160000";
i2c2 = "/i2c@c240000";
i2c3 = "/i2c@3180000";
@@ -39,6 +41,12 @@
status = "okay";
};
+ sdhci@3400000 {
+ status = "okay";
+ wp-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ };
+
sdhci@3460000 {
status = "okay";
bus-width = <8>;
@@ -55,4 +63,10 @@
i2c@31e0000 {
status = "okay";
};
+
+ bpmp {
+ i2c {
+ status = "okay";
+ };
+ };
};
diff --git a/board/nvidia/p2771-0000/p2771-0000.c
b/board/nvidia/p2771-0000/p2771-0000.c
index 4ba8ebc0dce8..0c828a200542 100644
--- a/board/nvidia/p2771-0000/p2771-0000.c
+++ b/board/nvidia/p2771-0000/p2771-0000.c
@@ -5,3 +5,29 @@
*/
#include <common.h>
+#include <i2c.h>
+#include "../p2571/max77620_init.h"
+
+int tegra_board_init(void)
+{
+ struct udevice *dev;
+ uchar val;
+ int ret;
+
+ /* Turn on MAX77620 LDO3 to 3.3V for SD card power */
+ debug("%s: Set LDO3 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
+ ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
+ if (ret) {
+ printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
+ return ret;
+ }
+ /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+ val = 0xF2;
+ ret = dm_i2c_write(dev, MAX77620_CNFG1_L3_REG, &val, 1);
+ if (ret) {
+ printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/configs/p2771-0000-a02_defconfig b/configs/p2771-0000-a02_defconfig
index 1fe25f58f199..404f7acf7ef5 100644
--- a/configs/p2771-0000-a02_defconfig
+++ b/configs/p2771-0000-a02_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_TEGRA186_BPMP_I2C=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
diff --git a/configs/p2771-0000-b00_defconfig b/configs/p2771-0000-b00_defconfig
index 552fb6cec78b..ad35c99bbbcc 100644
--- a/configs/p2771-0000-b00_defconfig
+++ b/configs/p2771-0000-b00_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_TEGRA186_BPMP_I2C=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
--
2.9.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
