With this patch we can change QE USB mode without need to hand-edit
the device tree.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
board/freescale/mpc8360emds/mpc8360emds.c | 12 ++++++++++++
include/configs/MPC8360EMDS.h | 2 ++
2 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c
b/board/freescale/mpc8360emds/mpc8360emds.c
index 54f2989..d4ba043 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -25,6 +25,8 @@
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
+#include <hwconfig.h>
+#include <fdt_support.h>
#if defined(CONFIG_PQ_MDS_PIB)
#include "../common/pq-mds-pib.h"
#endif
@@ -357,12 +359,22 @@ static int sdram_init(unsigned int base) { return 0; }
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
+static void ft_board_fixup_qe_usb(void *blob, bd_t *bd)
+{
+ if (!hwconfig_subarg_cmp("qe_usb", "mode", "peripheral"))
+ return;
+
+ do_fixup_by_compat(blob, "fsl,mpc8323-qe-usb", "mode",
+ "peripheral", sizeof("peripheral"), 1);
+}
+
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+ ft_board_fixup_qe_usb(blob, bd);
/*
* mpc8360ea pb mds errata 2: RGMII timing
* if on mpc8360ea rev. 2.1,
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 30a8d45..dab0173 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -382,6 +382,8 @@
#define CONFIG_NET_MULTI 1
#endif
+#define CONFIG_HWCONFIG 1
+
/*
* QE UEC ethernet configuration
*/
--
1.6.3.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
