On 07/26/2016 10:41 PM, Aron L. Phillips wrote: > To whom it may concern: > > I am not sure how this email list works but I am interested in knowing what > exactly does the mmc erase command do? I know it erases the mmc, but in what > manner? Does it clear bad sector marks or for that matter, place them? Any > explanation would be greatly appreciated. The type of mmc I am using is a > Kingston eMMC data flash that is similar to an SD card on an IC. > Sincerely,
Do you want to know ERASE command(CMD38) that supported on only u-boot side? Best Regards, Jaehoon Chung > > > > Aron L. Phillips > Software/Hardware Developer > GHI Electronics, LLC > Where Hardware Meets Software > 501 E. Whitcomb Ave > Madison Heights, MI 48071, USA > TEL: +1 (248) 397-8856 > FAX: +1 (248) 397-8890 > WEB: www.ghielectronics.com > > Disclaimer: The information transmitted and any attachments are intended only > for the person or entity to which it is addressed and may contain > confidential and/or privileged material. Any review, re-transmission, > dissemination or other use of, or taking of any action in reliance upon this > information by persons or entities other than the intended recipient is > prohibited. If you are not the intended recipient and received this in error, > please contact the sender and delete the material from your system. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
